A. Close Access WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE
_______ CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
R (1) Install the applicable flap track 1 actuator (Ref. TASK 27-54-49-400-001).
(2)
Install the applicable flap track 1 actuator drive lever (Ref. TASK 27-54-55-400-001).
(3)
Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER from the flap/slat control lever.
(4)
Fully retract the flaps (Ref. TASK 27-50-00-866-009).
(5)
Make sure that the work area is clean and clear of tool(s) and other items.
(6)
Install the applicable access panels (Ref. TASK 53-35-11-400-001):
-
for the LH wing, install 193AB, 193BB
-
for the RH wing, install 194AB, 194BB.
(7) Close the applicable MLG door (Ref. TASK 32-12-00-410-001).
Subtask 57-52-00-942-081
B. Removal of Equipment
(1)
Remove the access platform(s).
(2)
Remove the warning notice(s).
(3)
Remove the safety barriers.
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R 1EFF : 001-049, 051-061, 101-103, 201-203, 1 57-52-00Page A678 1 1 May 01/05 1 1 1CES 1
R **ON A/C 301-399,
R TASK 57-52-00-210-009
R General Visual Inspection of Inboard Double-Slotted Flap, External Surface of
R Upper and Lower Skin, LH/RH
R WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______
R START A TASK ON OR NEAR:
R - THE FLIGHT CONTROLS
R - THE FLIGHT CONTROL SURFACES
R - THE LANDING GEAR AND THE RELATED DOORS
R - COMPONENTS THAT MOVE.
R WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______
R GEAR.
R CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______
R - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
R - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
R - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY.
R INCORRECT INSTALLATION CAN CAUSE DAMAGE.
R 1. Reason for the Job__________________
R Refer to the MPD TASK: 575221-01
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific adjustable access platform
R No specific circuit breaker(s) safety clip(s)
R No specific safety barriers
R No specific warning notice
R 98D27803000000 1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
R B. Consumable Materials
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 11-026 GB DEF-STAN 68-148/1
R SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
R Material No. 19-003 USA AMS 3819
R LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R C. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 27-50-00-866-008 Extension of the Flaps on the Ground
R 27-50-00-866-009 Retraction of the Flaps on the Ground
R ASRM 575200 (for corrective action)
R 57-52-00-991-034 Fig. 630
R 3. Job Set-up__________
R Subtask 57-52-00-941-084
R A. Safety Precautions
R (1) Put the safety barriers in position.
R Subtask 57-52-00-860-107
R B. Aircraft Maintenance Configuration
R WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE_______
R CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM WINGS 机翼4(58)
