R Subtask 57-52-00-860-058
R  C. Aircraft Maintenance Configuration  
R  (1) Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER from the flap/slat  
R  control lever.  
R  (2) Retract the flaps (Ref. TASK 27-50-00-866-009).  
R  Subtask 57-52-00-942-070  
R  D. Removal of Equipment  
R  (1) Remove the access platform(s).  
R  (2) Remove the safety barriers.  
R  (3) Remove the warning notice(s).  
R  (4) Remove the ground support and maintenance equipment, the special and  
R  standard tools and all other items.
R TASK 57-52-00-210-003
R  Detailed Visual Inspection of Inboard Double Slotted Flap, Flap to Carriage  
R  Attachment Bracket at Track 2, LH/RH  
R  WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______  
R  START A TASK ON OR NEAR:  
R  - THE FLIGHT CONTROLS  
R  - THE FLIGHT CONTROL SURFACES  
R  - THE LANDING GEAR AND THE RELATED DOORS  
R  - COMPONENTS THAT MOVE.  
R  WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______  
R  GEAR.  
R  CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______  
R  - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.  
R  - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.  
R  - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY.  
R  INCORRECT INSTALLATION CAN CAUSE DAMAGE.  
R  1. Reason for the Job__________________  
R  Refer to the MPD TASK: 575227-01  
R  2. Job Set-up Information______________________  
R  A. Fixtures, Tools, Test and Support Equipment  
R  ------------------------------------------------------------------------------- 
R  REFERENCE  QTY DESIGNATION  
R  ------------------------------------------------------------------------------- 
R  No specific  circuit breaker(s) safety clip(s)  
R  No specific  safety barriers  
R  No specific  spark-proof lamp  
R  No specific  warning notice  
R  No specific  access platform 2.5 m (8 ft. 2 in.)
R B. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 27-50-00-866-008 R 27-50-00-866-009 R 27-54-61-000-002 R 27-54-61-400-006 R 57-55-11-000-004 R 57-55-11-400-004 R R ASRM 575200 R 57-52-00-991-019 
R 3. Job Set-up
__________ 
R Subtask 57-52-00-941-072 
R A. Safety Precautions Extension of the Flaps on the Ground Retraction of the Flaps on the Ground Removal of the Flap Kink-Seals Installation of the Flap Kink-Seals Removal of the Flap Track Fairings Nos. 2, 3 and 4 Installation of the Flap Track Fairings Nos. 2, 3 and 4 (for corrective action) Fig. 619 
R (1) Put a warning notice on the flap/slat control lever (panel 114VU) to R tell persons not to operate the flaps. R (2) Put the safety barriers in position. R Subtask 57-52-00-860-059 R B. Aircraft Maintenance Configuration R WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE
_______ R CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS R AND/OR DAMAGE. 
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM WINGS 机翼4(40)