R Subtask 57-52-00-865-096
R  B. Remove the safety clip(s) and the tag(s) and close this(these) circuit  
R  breaker(s):  
R  6CV, 8CV.  
R  Subtask 57-52-00-860-062  
R  C. Aircraft Maintenance Configuration  
R  (1) Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000)  
R  from the flap/slat control lever on the panel 114VU.  
R  Subtask 57-52-00-942-072  
R  D. Removal of Equipment  
R  (1) Remove the access platform(s).  
R  (2) Remove the safety barriers.  
R  (3) Remove the warning notice(s).  
R  (4) Remove the ground support and maintenance equipment, the special and  
R  standard tools and all other items.
R TASK 57-52-00-220-011
R  Special Detailed Inspection of Inboard Double Slotted Flap, Internal Support  
R  Brackets of Pylon Aft Fairing Attachment, LH/RH  
R  WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______  
R  START A TASK ON OR NEAR:  
R  - THE FLIGHT CONTROLS  
R  - THE FLIGHT CONTROL SURFACES  
R  - THE LANDING GEAR AND THE RELATED DOORS  
R  - COMPONENTS THAT MOVE.  
R  WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______  
R  GEAR.  
R  CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______  
R  - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.  
R  - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.  
R  - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY.  
R  INCORRECT INSTALLATION CAN CAUSE DAMAGE.  
R  1. Reason for the Job__________________  
R  Refer to the MPD TASK: 575230-01  
R  2. Job Set-up Information______________________  
R  A. Fixtures, Tools, Test and Support Equipment  
R  ------------------------------------------------------------------------------- 
R  REFERENCE  QTY DESIGNATION  
R  ------------------------------------------------------------------------------- 
R  No specific  circuit breaker(s) safety clip(s)  
R  No specific  safety barriers  
R  No specific  spark-proof lamp  
R  No specific  warning notice  
R  No specific  access platform 2.5 m (8 ft. 2 in.)  
R  B. Consumable Materials  
R  ------------------------------------------------------------------------------- 
R  REFERENCE  DESIGNATION  
R  ------------------------------------------------------------------------------- 
R  Material No. 08-061A  D  DAN 220  
R  ALUMINIUM FOIL ADHESIVE TAPE (Ref. 20-31-00)
R C. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R  27-50-00-866-008  Extension of the Flaps on the Ground  
R  27-50-00-866-009  Retraction of the Flaps on the Ground  
R  NTM 575230 PART 9  
R  ASRM 575200  (for corrective action)  
R  57-52-00-991-021  Fig. 621  
R  3. Job Set-up__________  
R  Subtask 57-52-00-941-074  
R  A. Safety Precautions 
R  (1) Put a warning notice on the flap/slat control lever (panel 114VU) to  
R  tell persons not to operate the flaps.  
R  (2) Put the safety barriers in position.  
R  Subtask 57-52-00-860-063  
R  B. Aircraft Maintenance Configuration  
R  WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE_______  
R  CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS  
R  AND/OR DAMAGE.  
R  (1) Fully extend the flaps (Ref. TASK 27-50-00-866-008).  
R  (2) Make sure that the LOCKING TOOL - FLAP/SLAT CONTROL LEVER is  
R  installed on the flap/slat control lever on the panel 114VU.  
R  Subtask 57-52-00-865-097  
R  C. Open, safety and tag this(these) circuit breaker(s):  
R  ------------------------------------------------------------------------------- 
R  PANEL  DESIGNATION  IDENT. LOCATION  
R  ------------------------------------------------------------------------------- 
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM WINGS 机翼4(43)