-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notices No specific Torque Wrench : range 0.00 to 1.20 m.daN
(0.00 to 9.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 02-003 F NSA 307110 TYPE 4 HYDRAULIC FLUID (PHOSPHATE ESTER BASE) (Ref. 20-31-00)
Material No. 02-003A F NSA 307110 TYPE 4 HYDRAULIC FLUID (PHOSPHATE ESTER BASE) (Ref. 20-31-00)
Material No. 02-003B F NSA 307-110 TYPE 4 HYDRAULIC FLUID (PHOSPHATE ESTER BASE) (Ref. 20-31-00)
1EFF : ALL 1 32-31-17Page 407 1 1 Aug 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 02-003C F NSA 307-110 TYPE IV
Material No. 02-003D HYDRAULIC FLUID (PHOSPHATE ESTER BASE) (Ref. 20-31-00)F NSA 307-110 TYPE IV
Material No. 07-010 HYDRAULIC FLUID (PHOSPHATE ESTER BASE) (Ref. 20-31-00)D DA-4-653-91
LACQUER OBSOLETE USE 16-047 (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
2 packings 32-31-45 01 -100
3 back-up rings 32-31-45 01 -110
5 back-up rings 32-31-45 01 -120
6 square seals 32-31-45 01 -130
12 square seal 32-31-45 01 -080
13 back-up ring 32-31-45 01 -070
15 back-up ring 32-31-45 01 -060
16 packing 32-31-45 01 -050
D. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-12-29-611-001 20-23-21-911-001 20-28-00-912-004 24-41-00-862-002 Fill the Hydraulic Fluid Reservoir with a Hand PumpRemoval/Installation of the Bobbins from their Housings and Installation of O-rings, Square Seals, and Back-up Rings on the BobbinsElectrical Bonding of Components With Conductive Bolts and Screws and Bonding Straps in the Fuselage and in the Wings (this does not include the tanks)-De-energize the Aircraft Electrical Circuits Supplied from the External Power
29-00-00-910-002 29-10-00-864-001 29-14-00-614-001 Safety Procedures of the Hydraulic SystemDepressurize the Green Hydraulic SystemDepressurization of the Hydraulic Reservoirs
1EFF : ALL 1 32-31-17Page 408 1 1 Aug 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-23-00-860-001 29-23-00-860-002 32-00-00-860-001 32-00-00-860-002 32-12-00-010-001 32-12-00-410-001 32-31-00-710-005 51-75-13-916-002 Disconnection of the Isolation Coupling of the Power Transfer Unit (PTU)Connection of the Isolation Coupling of the Power Transfer Unit (PTU)Flight Configuration Precautions with Electrical PowerGround Configuration after Flight Configuration with Electrical PowerOpen the Main Gear Doors for AccessClose the Main Gear Doors after AccessOperational Check to Ensure Safety Valve Closes at 260 ktsRepair to a layer of Corrosion Preventive Compound
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
32-31-17-991-001-A Fig. 401
R **ON A/C 401-499,
R 32-31-17-991-001 Fig. 401A
R **ON A/C ALL
3. Job Set-up__________
Subtask 32-31-17-860-051
A. Aircraft Maintenance Configuration
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架4(120)
