(b)
Move the gage on the SETTING TOOL-UPLOCK until it touches the gage bar.
(c)
Record the measurement.
1EFF : ALL 1 32-31-00Page A531 1 1 May 01/05 1 1 1CES 1
(2)
Remove the SETTING TOOL-UPLOCK from the applicable axle.
(3)
Compare the dimension with the value shown in Table A.
(4)
If the dimension is incorrect, do the applicable adjustments (Ref. TASK 32-31-00-820-003).
(5)
Measure the dimensions A and B. If one of the two dimensions are incorrect, do the applicable adjustments (Ref. TASK 32-31-00-820-003).
5. Close-up
________ Subtask 32-31-00-860-093
A. Aircraft Maintenance Configuration
(1) Pressurize the Green hydraulic system (Ref. TASK 29-10-00-863-001).
(2) Remove the RIGGING PIN from the MLG uplock. Subtask 32-31-00-867-064
B. Extension of the Landing Gear WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR ARE CLEAR.
_______
(1)
On the panel 400VU:
(a)
Put the landing-gear control lever to the DOWN position.
(b)
Make sure that the landing-gear locked-down lights are Green.
(2)
Install the safety devices on the landing gear (Ref. TASK 32-00-00-481-001).
Subtask 32-31-00-860-094
C. Aircraft Maintenance Configuration
(1)
Install the brake fan assembly (Ref. TASK 32-48-51-400-005).
(2)
Install the hub cap on the applicable inboard wheel.
(3)
Remove the FALSE TARGET from the applicable MLG door uplock 27GA(29GA), 26GA(28GA).
1EFF : ALL 1 32-31-00Page A532 1 1 May 01/05 1 1 1CES 1
(4)
Remove the safety device from the applicable MLG door.
(5)
Close the applicable MLG door with the ground opening handle (Ref. TASK 32-12-00-410-001).
(6)
Depressurize the Green hydraulic system (Ref. TASK 29-00-00-864-001).
(7)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
Subtask 32-31-00-410-069
D. Close Access
(1) Install the upper-wing fillet fairing (Ref. TASK 53-35-11-400-001).
(2)
Remove the access platform(s). Subtask 32-31-00-586-053
E. Lower the Aircraft
(1)
Lower the aircraft off the jacks (Ref. TASK 07-11-00-586-002). Subtask 32-31-00-942-087
F. Removal of Equipment
(1)
Remove the warning notice(s).
(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 32-31-00Page A533 1 1 May 01/05 1 1 1CES 1R TASK 32-31-00-720-007
R Functional Test of the MLG Lockstay Actuating Cylinder with Brace Tool R Installed
R WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ R START A TASK ON OR NEAR: R - THE FLIGHT CONTROLS R - THE FLIGHT CONTROL SURFACES R - THE LANDING GEAR AND THE RELATED DOORS R - COMPONENTS THAT MOVE.
R WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ R GEAR.
R 1. Reason for the Job
__________________
R Self Explanatory
R 2. Job Set-up Information
______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------R REFERENCE QTY DESIGNATION R -------------------------------------------------------------------------------
R No specific safety barriers R No specific warning notice R 98F32304000000 6 FALSE TARGET
R B. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 24-41-00-861-002 R R 24-41-00-862-002 R R 29-10-00-863-001 R 29-10-00-864-001 R 29-24-00-863-001 R R 29-24-00-864-001 R 31-60-00-860-001 Energize the Aircraft Electrical Circuits from the External Power De-energize the Aircraft Electrical Circuits Supplied from the External Power Pressurize the Green Hydraulic System Depressurize the Green Hydraulic System Pressurize the Yellow Hydraulic System with the Electric Pump Depressurize the Yellow Hydraulic System EIS Start Procedure
1EFF : ALL 1 32-31-00Page A534 1 1 Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 31-60-00-860-002 R 32-00-00-080-001 R 32-00-00-480-001 R R 32-00-00-481-001 R R 32-00-00-481-002 R R 32-00-00-860-001 R R 32-00-00-860-002 R R 32-12-00-010-001 R 32-12-00-410-001 R 32-22-00-010-001 R 32-22-00-410-001
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架4(95)
