(2)
Removal of the fire-extinguisher discharge outlet and the spray tubing.
(a)
Remove and discard the lockwire from the discharge outlet (14), the swivel nut (13) and the couplings of the spray tubing (15).
(b)
Remove the clamp (16).
(c)
Hold the spray tubing (15) in position, loosen the nuts (19) on the spray tubing (15) and the discharge outlet (14) and slide them back.
(d)
Hold the spray tubing (15) in position, loosen the swivel nuts (13). But do not remove the discharge outlet (14) from the fire extinguisher bottle (21).
(e)
Remove the spray tubing (15).
(f)
Remove and discard the 0-rings (18) from the spray tubing (15) and the discharge outlet (14).
(g)
Put blanking plugs on the disconnected line ends.
(3)
Remove the Fire Exinguisher Bottle
(a)
Remove the screw (3B), move the switch guard (3A) back and disconnect the electrical connector (3) from the pressure switch on the fire-extinguisher bottle (21).
(b)
Put blanking caps on the disconnected electrical connectors.
(c)
Release the nut (2) and move the overboard pipe (1) away from the fire-extinguisher bottle (21).
(d)
Put blanking plugs on the disconnected line ends.
(e)
Remove the nut (10), the bolt (7), the washer (9), and the bonding strap (8).
(f)
Remove nuts (4), the bolts (6) and the washers (5).
(g)
Put the protective cap (CD-18) on the discharge outlet (14).
(h)
Remove the fire-extinguisher bottle (21).
R 1EFF : 051-099, 201-210, 1 26-22-41Page 407 1 1 May 01/05 1 1 1CES 1
**ON A/C ALL
TASK 26-22-41-400-001
Installation of the Fire Extinguisher Bottle (11WF)
WARNING : THE CARTRIDGE IS AN EXPLOSIVE DEVICE. REMOVE IT BEFORE YOU
_______ DISASSEMBLE THE FIRE EXTINGUISHER BOTTLE. TO PREVENT INJURY TO THE PERSONNEL BECAUSE OF THE EXPLOSION OF THE CARTRIDGE IF IT HAS NOT BEEN FIRED:
-INSTALL A SHUNT DEVICE.
-THIS WILL SHUNT THE PINS TOGETHER ON THE CARTRIDGE BEFORE ITS
REMOVAL.
DO NOT USE A FOIL SHUNT.
WARNING : THE ACCIDENTAL FIRING OF THE EXTINGUISHER BOTTLE CAN CAUSE SERIOUS
_______ INJURY TO PERSONS WHO WORK OR ARE IN THE CLOSE PROXIMITY.
WARNING : BE VERY CAREFUL WHEN YOU MOVE A FILLED FIRE EXTINGUISHER BOTTLE. A
_______ HEAVY SHOCK COULD CAUSE PERCUSSION.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice No specific 3/32 in. allen key No specific 600 ohm boomset No specific 600 ohm headset No specific access platform 4.0 m (13 ft. 1 in.) No specific Torque Wrench : range 1.00 to 10.00 m.daN
(8.00 to 75.00 lbf.ft)
1EFF : ALL 1 26-22-41Page 408 1 1 May 01/05R 1 1 1CES 1
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
No specific corrosion-resistant steel lockwire 0.8 mm (0.032 in.) dia. Material No. 05-002 USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
18 0-rings 26-22-04 02 -050
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
20-28-00-912-004 Electrical Bonding of Components With Conductive Bolts and Screws and Bonding Straps in the Fuselage and in the Wings (this does not include the tanks)-
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 26-22-42-400-001 Installation of the Fire Extinguisher Bottle Cartridge (12WF)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FIRE PROTECTION 防火2(80)
