曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
reference number, which is used to make the selection.
The selection is made by inputting the reference number into the
cursor and then pressing the ENTER key.
NOTE: • If the desired choice is not among those shown on the
display page, pressing the PREV or NEXT key to page
forward or backward will display additional choices when
available.
• If the reference number input into the cursor is in error,
pressing the BACK key will delete the entry.
• Pilot defined waypoint identifiers are displayed in a light
green color.
List Input Process
This is the process which is the easiest to use in the event that the
Reference Number input process does not present the desired
waypoint identifier as one of the available choices.
With the cursor over a waypoint entry field, pressing the LIST key
will cause the Normal LIST page to appear. A list of numbered
selections appropriate for the entry field will be displayed in a
window, and other LIST categories will be displayed next to the line
select keys. Any LIST category can be placed in the LIST window
by pressing the corresponding line select key.
NOTE: In selecting waypoint identifiers, routes, or NAVAIDs as
the LIST categories of possible choices, all efforts are
made to use the computer's power in order to present the
most optimum lists possible. For example, in selecting a
flight plan from amongst the many possible stored routes,
the lists presented will begin with those routes originating
closest to the departure airport.
Section V
Operations
5-12 2423sv602
Change 1
LIST Page
The Normal LIST page displays the selected list and presents
options for selecting other lists. The page is accessed by pressing
the LIST key whenever the cursor is over any field where a data
base item is normally entered.
The selectable lists are displayed next to the line select keys. A
control window is located in the center of the display. Any list may
be placed into the control window by pressing the line select key for
that list. The selectable lists are; APT (airports), NDB, INT
(intersections), COPY RTE (routes), Airways and VOR/PLT (a
mixture of VORs and pilot defined waypoints). PLN LANG (plain
language) is displayed in place of APT, VOR/PLT or NDB if those
are displayed (see below).
GAP - Pressing this line select key when the page has been
accessed from a FPL or ROUTE page will insert a gap (*GAP*) into
the flight plan or route.
CAUTION: When a GAP has been inserted, the flight plan will
not auto-sequence to the next leg. Rather, the
aircraft will fly an extension of the last leg with NAV
and VNAV flags out of view on the HSI. IT IS THE
RESPONSIBILITY OF THE PILOT TO TAKE
APPROPRIATE ACTION TO CONTINUE
ACCURATE NAVIGATION OF THE AIRCRAFT. He
may go "Direct To" or edit the gap out of the flight
plan.
Section V
Operations
2423sv602 5-13
Change 1
List Function-Plain Language
By pressing the PLN LANG line select key when APT, VOR/PLT or
NDBs are listed, the plain language name of the APT, VOR or NDB
will be displayed (up to 15 characters). The reference number can
still be used to select the desired item.
Direct Entry Process
Both of the first two input processes call for the selection of one
number to input an entire waypoint identifier. They were designed to
minimize the requirement for "typing" in each alphanumeric
character of an identifier. In those cases where the typing
requirement is unavoidable, data entry is accomplished by simply
typing in the required data and then pressing the ENTER key.
Section V
Operations
5-14 2423sv602
Change 1
If the identifier is in the data base, a Waypoint Identification page
for that identifier will appear. This page will show the identifier's
position coordinates and other pertinent data about the identifier.
• If the coordinates shown are correct, pressing the ENTER key
or the ACCEPT line select key will confirm that the correct
waypoint is being used.
• If the coordinates shown are incorrect and the identifier was
spelled correctly, there is more than one identifier in the data
base with that identifier. If this is the case, the fraction
adjacent to the identifier's name will read something other than
1/1. Press the PREV or NEXT keys to access the other
Waypoint Identification pages. When the desired waypoint is
located, pressing the ENTER key or the ACCEPT line select
key will confirm this as the correct waypoint for data entry. If
the desired data is not located, a pilot waypoint can be defined
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
庞巴迪挑战者手册10(64)
