• 热门标签

当前位置: 主页 > 航空资料 > 飞行资料 >

时间:2010-05-17 22:15来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

NDB NAME DATABASE FAIL - An error was detected in the NDB
plain language name database.
1. Reload navigation data base.
NEW MAINT LOG EXISTS - This message is displayed one minute
after landing when any diagnostic history event has been recorded
during the previous flight.
1. Refer to "Maintenance Data Download" section of this manual
for procedure to download and display the Maintenance Log.
NEXT LEG UNDEFINED - A GAP is in the next flight plan waypoint
position. The flight plan must be edited by the pilot to eliminate the
GAP. If the GAP is not eliminated, the aircraft will fly to the current
TO waypoint, and after waypoint passage will continue to fly the
same desired track with the TO/FROM flag now indicating FROM.
The WPT annunciator will remain illuminated after waypoint passage
and a CURRENT LEG EXTENDED message will appear on the
message page. NOTE: The gap placed at the end of the approach
before the destination airport does not trigger this message.
1. Press the FPL key to access the flight plan.
2. Edit the flight plan to remove GAP.
Messages
2423sv602 17
Change 1
NEXT VNAV LEG INVALID - Next lateral leg is not valid for VNAV.
This message will apply to procedural legs in SIDs, STARs and
approaches which are "floating waypoints", e.g., heading to intercept
a VOR radial.
NO DME RECEIVED – RRS DME list was tuned and no data was
received for 5 minutes.
NO GPS INTEG - GPS integrity monitoring is not available for 27
seconds in Enroute and for 7 seconds in Terminal phase of flight. In
Approach phase after FAF, GPS integrity monitoring is not available
and HDOP is greater than 4.0 for 7 seconds.
NO GPS RAIM @ FAF - RAIM may not be available at the Final
Approach Fix or HIL is greater than 0.3 nm.
NO GPS RAIM @ MAP - RAIM is not available at the Missed
Approach Point or HIL is greater than 0.3 nm.
NO HEADING - No heading information is being received. This
message will not be displayed while on the ground. If a valid
heading source was available, it should have already been
automatically selected.
1. Press DATA key to access DATA 4/4.
2. Press HDG to place the cursor over the heading field.
3. Press LIST key to access HDG SRC page. Change heading
source if desired.
4. If no other heading source is available, manually input the
aircraft’s heading on DATA 4/4.
NO INTERCEPT - System is in the heading intercept mode and the
selected heading will not intercept current Nav leg.
NO TACAN RECEIVED- RRS TACAN list was tuned and no data
was received for 5 minutes.
NO VOR RECEIVED- RRS VOR list was tuned and no data was
received for 5 minutes.
Messages
18 2423sv602
Change 1
NONVOLATILE MEMORY FAIL - The non-volatile memory has
failed the power-up test. Some or all of the NVM parameters may be
lost. This message can only occur following system initialization.
NORMAL CKLIST DB FAIL - Appears if the normal checklist
database has failed (only with Collins Pro Line 4 interface).
1. Reload checklist data base.
OFFSIDE FLAP POS FAILED – No offside flap position input is
detected in the Lear 45 Primus 1000 installation.
ONSIDE FLAP POS FAILED – No onside flap position input is
detected in the Lear 45 Primus 1000 installation.
OTHER FMS HEADING FAILED - The FMS is using heading from
the other FMS, and that heading has failed.
1. Press The DATA key to access DATA 4/4.
2. Place cursor over the HDG field.
3. Press the LIST key to access the HDG SRC page and select
another source if available.
OUTSIDE LOA - The aircraft is outside of a defined LORAN
Operating Area (LOA). This message will be removed after it is
displayed.
PERF DATABASE FAILED - The performance database has failed.
Advanced performance features will be disabled.
1. Reload performance data base.
PERF DB ID MISMATCH - The performance database ID entered
on the configuration pages does not agree with the performance
database ID on the disk that is loaded.
PERF T/O GW UPDATE REQD – The current gross weight differs
from the value entered in the gross weight field by more than 2.5%.
1. Press “BACK” “ ENTER” to update or,
2. Enter a manual value in the gross weight field.
Messages
2423sv602 19
Change 1
PILOT APPR DATABASE FAIL - A problem has been detected in
the Pilot defined approach data base.
3. Reload data from Pilot Data Save disk.
PILOT ARPT DATABASE FAIL - A problem has been detected in
the Pilot defined airport data base.
1. Reload data from Pilot Data Save disk.
PILOT DATABASES FAILED - The data base of all pilot defined
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:庞巴迪挑战者手册10(129)