曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
circle route along which SIGMETs are desired. This will initially be
the first waypoint of the flight plan; however, pressing the FR line
select key will place the cursor over this identifier entry field and the
FR waypoint may be altered.
TO [3L] - The to waypoint which will be used for defining the great
circle route along which SIGMETs are desired. This will initially be
the last waypoint of the flight plan (prior to a gap); however, pressing
the TO line select key will place the cursor over this identifier entry
field and the TO waypoint may be altered.
DISPLAY SIGMETS [4L] - This will access the SIGMETS page(s)
for display of SIGMETs received with the last requested update.
(SIGMETs received from prior updates are not stored in memory.)
XMIT REQUEST [5L] - To transmit a request for the latest SIGMET
reports pertinent to the great circle route between the FR and TO
waypoints.
RETURN [5R] - Returns the display to the AFIS MENU page.
Appendix A
2423sv602 A-11
Change 1
SIGMETS Page
The SIGMETS page is accessed by selecting the DISPLAY
SIGMETS option on the REQUEST SIGMETS page. This page
provides a review of all SIGMETs (pertinent to the route defined with
the last update request) which are subsequently canceled or
amended enroute by the Global Data Center via the data link.
SIGMETs may consist of one to 29 pages of text and display their
FAA code names followed by text.
DATE - The issue date of the SIGMET. This field will be blank if no
date is supplied by the update.
RETURN [5R] - Returns the display to the REQUEST SIGMETS
page.
Appendix A
A-12 2423sv602
Change 1
Winds Aloft
WINDS ALOFT LIST Page
This page is accessed by pressing the WINDS line select key on the
AFIS MENU page. It is used to request winds aloft reports from up
to five locations at a time and for viewing the status of requested
winds aloft reports.
Line select keys [2L, 3L, 4L, 2R, and 3R] are used to access the
WINDS ALOFT pages (which are used to view received winds aloft
reports) or for entry of a new identifier for which a winds aloft report
is desired. When the line select key is first pressed, the cursor is
brought onto that entry field. Pressing the line select key a second
time will access the Winds Aloft page. Alternately, a new identifier
may be entered by typing the identifier and pressing the ENTER key.
Identifiers displayed inside parentheses indicate that data has not
been received. After entry of a new identifier on the Winds Aloft List
page, that identifier will be displayed inside parentheses. The
parentheses will remain until XMIT REQUEST has been selected
and a winds aloft report has been received. (WAITING) will be
displayed above XMIT REQUEST until new winds aloft data is
received.
An identifier displayed without parentheses indicates that a winds
aloft report has been received and may be viewed by pressing the
corresponding line select key twice.
Valid identifiers include VOR, VORTAC, airport, or waypoint
locations.
XMIT REQUEST [5L] - This is used to transmit the request for winds
aloft reports of the identifiers displayed within parentheses, and to
request the latest winds aloft reports available for the other
identifiers.
RETURN [5R] - Returns the display to the AFIS MENU page.
Appendix A
2423sv602 A-13
Change 1
WINDS ALOFT Page
This page is accessed by pressing the line select key on the WINDS
ALOFT List page corresponding to the desired station identifier. The
winds aloft data is displayed either from AFIS DTU or from AFIS
ground-air data link. When uplinked data is shown, the 5,000 and
10.000 foot reports (depicted below) are not shown.
Station Identifier - This is the identifier (upper left hand corner)
corresponding to the location of the displayed winds aloft reports.
Display - Each line displays the altitude, wind direction (true north),
wind velocity (knots), and temperature (degrees Celsius).
Time - The valid time for the reported winds aloft is displayed in the
upper right hand corner.
RETURN [5R] - Returns the display to the WINDS ALOFT List page.
Appendix A
A-14 2423sv602
Change 1
AFIS Flight Plan
FPL Page
This page is accessed by pressing the FPL line select key on the
AFIS MENU page. This page is used to access the AFIS disk flight
plan and to recall the flight plan. The page also displays the name of
the currently received AFIS disk or uplink flight plan and allows
insertion of the flight plan as the active FMS flight plan.
When neither a disk nor recall flight plan is available for loading or a
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
庞巴迪挑战者手册10(121)
