曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
flight plan has been selected, dashes are displayed in place of the
identifier and date. When a flight plan has been requested from
either the DISK FPL LIST line select key or the RECALL FPL line
select key., but the flight plan has not yet been received, (WAITING)
will be displayed below the dashes. When the flight plan is being
received but is not yet complete, (RECEIVING) will be displayed
below the dashes. Once the flight plan is received, the REPLACE
FPL prompt will appear and the flight plan identifier and date will
appear.
When REPLACE FPL line select key [5L] is pressed, REPLACE FPL
is blanked and (REPLACING) will flash above that field. Once
replacing is complete, REPLACE FPL prompt will reappear.
DISK FPL LIST [1L] - Displays the AFIS Disk FPL List page.
RECALL FPL [2L] - Displays AFIS Recall FPL page.
REPLACE FPL [5L] - Pressing this key initiates the process of
replacing the active FMS FPL with the displayed AFIS disk or uplink
recall FPL.
Appendix A
2423sv602 A-15
Change 1
DISK FPL LIST Page
This page is accessed by pressing the DISK FPL LIST line select
key on the AFIS FPL page. The page is used to select a flight plan
from the list for insertion into the FMS as the active flight plan.
When this page is selected and there is no disk in the AFIS DTU, the
message NO DISK will be displayed in the center page. If there are
no flight plans on the disk, the message NO AFIS FLIGHT PLANS
ON DISK will appear in the center of the page. When a readable
disk is in the AFIS DTU and this page is selected the massage
READING DISK will appear in the center of the page until the list
and SELECT FPL# prompt appear.
The list contains up to 25 AFIS disk flight plan names and may be
displayed on multiple pages. Pages are accessed using the NEXT
and PREV keys.
SELECT FPL# - Typing a number into the blank and pressing
ENTER will automatically change to the AFIS FPL page and the
process to select the flight plan from the disk will begin. The
selected flight plan will then be displayed on the AFIS FPL page and
may be entered as the active FMS flight plan.
Appendix A
A-16 2423sv602
Change 1
RECALL FPL Page
This page is accessed from the AFIS FPL page and allows entry of
information required to request a previously defined AFIS FPL. The
re called flight plan will be uplinked via the ground-air data link for
insertion into the FMS as an active flight plan on the AFIS FPL page.
There are two methods of selecting a flight plan for recall. Either the
FPL# is entered at line select key [4L] or the flight plan FROM, TO
DATE, and ETD are entered. Once the desired entry is made the
XMIT REQUEST line select key is pressed which transmits the
request via the ground-air uplink and automatically returns to the
AFIS FPL page for entry into the active FMS flight plan.
FROM [2L] - A four character identifier is entered here for the recall
flight plan origination (used in lieu of inserting the FPL#).
TO [3L] - A four character identifier is entered here for the recall
flight plan destination (used in lieu of inserting FPL#).
DATE [2R] - Numeric entry of date (DDMMYY) is entered here for
the recall flight plan (used in lieu of inserting the FPL#).
ETD [3R] - A four character numeric entry is entered for the recall
flight plan. Minimum time is 0000, maximum is 2359 (used in lieu of
inserting the FPL#).
FPL # [4L] - A five character alpha-numeric entry is made here for
the recall flight plan. The five characters consist of a single alpha
entry followed by four numbers.
XMIT REQUEST [5L] - This key is pressed after the desired recall
flight plan has been entered. When this key is pressed, the request
is sent via the ground-air uplink and the screen will return to the
AFIS FPL page.
Appendix A
2423sv602 A-17
Change 1
AFIS OPTIONS Page
This page is accessed from the AFIS MENU page.
This screen is used to enable or disable the various AFIS OPTIONS.
It is important to note that when a prompt reads OFF, the option is
disabled and pressing the line select key will select that option.
When the prompt reads AUTO, the option is enabled and pressing
the line select key will deselect the option.
In multiple FMS installations, option changes made on one FMS will
appear on the other FMSs. If the option is not received on the other
FMS within three seconds, the field will revert to its previous display.
POS [1R] - This key alternately selects and deselects AFIS
Automatic Position Reporting (AUTO/OFF).
WX [2R] - This key alternately selects and deselects Automatic AFIS
Weather Reporting (AUTO/OFF).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
庞巴迪挑战者手册10(122)
