曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
frequency from the radio. When a new frequency is being entered,
ACT disappears until the ENTER key is pressed and the radio
responds.
The TUNE Page has a Recall (RCL) line, which will always contain
the last frequency used whenever a new frequency is entered into
the Active window. The RCL Key swaps the RCL frequency with the
current ACTIVE frequency. Each of the four preset frequencies
remain intact until modified by entering a different frequency.
The TAC (TACAN) line select key will only appear when a TACAN or
Pro Line 4 FIAS is configured.
A second TUNE page is available when a third COM is configured.
Section II
Control & Display
2-28 2423sv602
Change 1
Cursor movement in the control window is controlled using the
ENTER key. If the ENTER key is pressed and nothing new has
been entered into the active frequency, the cursor will advance to
preset position 1. Each time the ENTER key is pressed, the cursor
will move down one preset position. After preset position 4, the
cursor will return to the home position (active frequency).
The preset frequencies are changed or entered by placing the cursor
over the desired preset position, inputting the new frequency, and
then pressing the ENTER key. The new frequency may be input
directly through the numeric keys or by inputting the reference
number (1-4) of one of the preset frequencies. When typing in the
frequency, the decimal point will be automatically placed in the
proper position. For example, if a frequency of 135.65 is desired,
input the numbers 13565. If 118.00 is desired, the number can be
input as 118, 1180, or 11800. In any case, when the ENTER key is
pressed, the display will read 118.00.
When tuning VOR and ADF frequencies the operator has the option
of either entering the actual frequency or the identifier using the LIST
function or direct input of identifier.
The ATC line select key is used to gain access to control of the
transponder codes. Preselects 3 and 4 are prefilled with codes 1200
and 7700.
LIST Key
The LIST key is used to provide a list of options appropriate to the
data to be entered. While performing data entry, pressing the LIST
key presents a list of selections appropriate to the entry being made.
MENU Key
The MENU key is used to present a list of alternate formats or
options for the FUEL, FPL or TUNE mode being displayed. A small
“M” in a box will appear on the title line of any page in which the
MENU key is active. Refer to the applicable Section for further
details.
Section III
Quick References
2423sv602 TOC-i
Change 1
TABLE OF CONTENTS
QUICK REFERENCES....................................................................3-1
Section III
Quick References
2423sv602 3-1
Change 1
QUICK REFERENCES
This section is intended for filing quick reference material such as
the Operator’s Checklist.
Section IV
Data Base
2423sv602 TOC-i
Change 1
TABLE OF CONTENTS
INTRODUCTION ............................................................................ 4-1
Performance Data Base .............................................................. 4-1
Checklist Data Base .................................................................... 4-1
Dual Cycle Data Base ................................................................. 4-1
NAVIGATION DATA BASE........................................................... 4-3
Navigation Data Base Loading.................................................... 4-7
Loading Data Base Disks......................................................... 4-7
Errors / Messages .................................................................. 4-10
Nav Data Base Interrogation ..................................................... 4-13
Waypoints............................................................................... 4-13
Terminal Procedures.............................................................. 4-14
SID.......................................................................................... 4-15
STAR...................................................................................... 4-16
Approach................................................................................ 4-16
Runway .................................................................................. 4-17
Airway..................................................................................... 4-18
PILOT DATA ................................................................................ 4-19
Pilot Data Menu Page ............................................................ 4-19
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
庞巴迪挑战者手册10(34)
