NOTE: You can use the PWA 85749 Adapter to loosen the electrical
____
connectors.
(a) Install the protection caps on the open ends of the electrical connectors.
S 034-008-N00
(13)
Remove the bolts (18, 20) which attach the ends of the cable for the stator (17) and the retaining plate (21) to the bracket.
S 034-029-N00
(14)
Remove the retaining plate (21) and the ends of the cable for the stator (17) from the bracket.
S 034-070-N00
(15)
Disconnect the cables for the stator (17) from the spring clips around the IDG drive pad.
S 034-009-N00
(16)
Loosen the hose clamp (13) for the cooling air tube (14) located on the right side of the stator (17).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-21-05
ALL ú ú N03 Page 409 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
S 034-030-N00
(17)
Disconnect this cooling air tube (14) from the stator (17).
S 034-069-N00
(18)
ENGINES POST-PW-SB 72-375;
Do these steps:
(a)
Loosen the hose clamp (13) for the cooling air tube (14) located at the bottom of the stator (17).
(b)
Remove the bolts and/or nuts from the clamps that attach the cooling air tube to the brackets on the gearbox, oil tank, and diffuser case.
(c)
Move the tube away from the EEC alternator.
NOTE: The clamps can stay with the tube.
____
(d)
Remove the bolts (11) and washer (19) which attach the stator (17) to the EEC alternator drive pad.
(e)
Remove the stator (17) from the gearbox.
1) Discard the packing (15).
S 034-068-N00
(19)
ENGINES PRE-PW-SB 72-375;
Do these steps:
(a)
Remove the bolt (18) which attaches the clamp (16) on the stator cable to the bracket on the right side of the stator.
(b)
Remove the clamp (16) from the cable for the stator (17).
(c)
Remove the bolts (11) and washer (19) which attach the stator (17) and the heat shield (12) to the EEC alternator drive pad.
(d)
Remove the stator (17) and the heat shield (12) from the gearbox. 1) Discard the packing (15).
S 034-014-N00
(20) Install the protection cap on the EEC alternator drive pad and the open end of the stator (17).
TASK 73-21-05-004-015-N00
3. Remove the EEC Alternator (N2 Transducer) Rotor (Fig. 403)
_______________________________________________
A. Special Tools and Equipment
(1)
PWA 85238 - Wrench holder (Engines PRE-PW-SB 72-375),
Pratt & Whitney, Commercial Products Division,
400 Main Street, East Hartford, CT 06108
(2)
PWA 86603 - Adapter, Wrench (Engines POST-PW-SB 72-375),
Pratt & Whitney
(3)
PWA 85931 - Puller (Engines PRE-PW-SB 72-375), Pratt & Whitney
(4)
PWA 86551 - Puller (Engines POST-PW-SB 72-375), Pratt & Whitney
B.
References
(1)
IPC 72-61-05 Fig. 1
(2)
IPC 73-21-05 Fig. 5
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-21-05
ALL ú ú N03 Page 410 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
PWA 85238
WRENCH 1 SEE A ADAPTER PWA 86603 2 SEE A
BODY BODY
JAM NUTS JAM NUTS
EEC EEC
ALTERNATOR ALTERNATOR
DRIVE PAD DRIVE PAD
THREADED THREADED
SHAFT BOLT HANDLE SHAFT BOLT HANDLE
(3 LOCATIONS) (3 LOCATIONS)
2. LOCK RING
THREADED 1. NUT
SHAFT
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 发动机燃油和控制 2(25)