1) Tighten the adapter (10) to 65-75 pound-inches (7.3-8.5 newton-meters).
(f)
Install the adapter (11) in the PAMB port on the EEC (2).
1) Tighten the adapter (11) to 90-100 pound-inches (10.1-11.3 newton-meters).
(g)
Install the adapter (16) in the PB port on the EEC (2).
1) Tighten the adapter (16) to 110-120 pound-inches (12.4-13.6 newton-meters).
(h)
Install the adapter (17) in the P5 port on the EEC (2).
1) Tighten the adapter (17) to 150-170 pound-inches (16.9-19.2 newton-meters).
S 424-019-N00
(4)
Install the EEC (2) on the engine with the bolt holes in the shock mounts aligned with the holes in the brackets.
(a)
Make sure the pressure sensing ports point down.
S 644-036-N00
(5)
Lubricate the threads of the bolts (27) with engine oil.
S 434-020-N00
(6)
Attach the EEC (2) to the engine brackets with the bolts (27) and washers (26).
(a)
Tighten the bolts (27) to 150-170 pound-inches (16.9-19.2 newton-meters).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-21-04
ALL ú ú N03 Page 407 ú Oct 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
S 434-021-N00
(7) Remove the protection caps from the ends of the pressure sensing hoses (12, 13, 14, and 15).
S 434-022-N00
CAUTION:_______DO NOT LUBRICATE THE THREADS OF THE ADAPTER. THE LUBRICANT CAN CAUSE CONTAMINATION OF THE EEC.
CAUTION: HOLD THE WRENCH FLATS FOR THE EEC ADAPTERS WHEN YOU TORQUE THE
_______ HOSE NUTS. THIS WILL PREVENT DAMAGE TO THE THREADS IN THE EEC.
(8)
Connect the hose (12) to the adapter (10).
(a)
Tighten the coupling nut to 90-100 pound-inches (10.2-11.3 newton-meters). 1) Install the Lockwire or the Safety Cable and Safety Cable
Ferrule to the tube nuts.
S 434-023-N00
(9)
Connect the hose (13) to the adapter (11).
(a)
Tighten the coupling nut to 135-150 pound-inches (15.3-16.9 newton-meters). 1) Install the Lockwire or the Safety Cable and Safety Cable
Ferrule to the tube nuts.
S 434-024-N00
(10)
Connect the hose (15) to the adapter (17).
(a)
Tighten the coupling nut to 450-500 pound-inches (50.8-56.5 newton-meters). 1) Install the Lockwire or the Safety Cable and Safety Cable
Ferrule to the tube nuts.
S 434-025-N00
(11)
Connect the hose (14) to the adapter (16).
(a)
Tighten the coupling nut to 270-300 pound-inches (30.5-33.9 newton-meters). 1) Install the Lockwire or the Safety Cable and Safety Cable
Ferrule to the tube nuts.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
73-21-04
ALL ú ú N03 Page 408 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 214-026-N00
CAUTION:_______ DO NOT CONNECT THE GROUNDING STRAP TO THE EEC IF IT HAS LOOSE
MOUNTING LUGS OR THE STRANDS ARE MORE THAN 25 PERCENT BROKEN.
A GROUNDING STRAP WITH LOOSE MOUNTING LUGS OR BROKEN STRANDS
CAN CAUSE UNSATISFACTORY LIGHTNING PROTECTION.
(12)
Examine the grounding strap (25) for loose mounting lugs and broken strands.
(a)
If there are loose mounting lugs or the grounding strap is more than 25 percent broken, replace the grounding strap.
S 644-037-N00
(13)
Lubricate the threads of the bolt (24) with engine oil.
S 434-027-N00
(14)
Attach the grounding strap (25) to the top aft corner of the EEC (2) with the bolt (24).
(a)
Tighten the bolt (24) to 75-85 pound-inches (8.5-9.6 newton-meters).
S 434-028-N00
(15)
Remove the protection caps from the electrical connectors DM7198A
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 发动机燃油和控制 2(17)
