-------------------------------------------------------------------------------
| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) | -------------------------------------------------------------------------------|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE | | |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN | | |(*=REMARK)| RESOLUTION | | | | | | |BUS No.| | |(X=NOTE) | ACCURACY | | | | | | |ATA REF| | | | | | | | | | |CONV | -------------------------------------------------------------------------------| |LH FLAP |BIT STATUS 1| | |No21| | | | | | |CONNECTED | | | | | | | | | | |----------|------------|----|----|----|----|----|-----| | | |LH FLAP |BIT STATUS 1| | |No22| | | | | | |PROXIMITY | | | | | | | | | | |SENSOR | | | | | | | | | | |SERVICE-| | | | | | | | | | |ABLE | | | | | | | | | | |----------|------------|----|----|----|----|----|-----| | | | SPARE | | | |No23| | | | | | |----------|------------|----|----|----|----|----|-----| | | | SPARE | | | |No24| | | | | | |----------|------------|----|----|----|----|----|-----| | | |RH FLAP |BIT STATUS 1| | |No25| | | | | | |CONNECTED | | | | | | | | | | |----------|------------|----|----|----|----|----|-----| | | |RH FLAP |BIT STATUS 1| | |No26| | | | | | |PROXIMITY | | | | | | | | | | |SENSOR | | | | | | | | | | |SERVICE-| | | | | | | | | | |ABLE | | | | | | | | | | |----------|------------|----|----|----|----|----|-----| | | |PAD BIT |BIT STATUS 1| | |No27| | | | | | |ALWAYS 1 | | | | | | | | | | |----------|------------|----|----|----|----|----|-----| | | |PROXIMITY |BIT STATUS 1| | |No28| | | | | | |SENSOR | | | | | | | | | | |DISAGREE | | | | | | | | | | |----------|------------|----|----|----|----|----|-----| | | |SYSTEM |BIT STATUS 1| | |No29| | | | | | |FAULT | | | | | | | | | | |----------|------------|----|----|----|----|----|-----| |
LGCIU 1/2 PARAMETER LIST EQPT 6D
1EFF : ALL 1 32-61-00Page 22 1 1 Feb 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------| PARAMETER LIST PARAMETER CHARACTERISTICS (NUMERIC) | -------------------------------------------------------------------------------|EQ.SYS.LAB.SDI|PARAMETER | WORD RANGE |UNIT|SIG |BITS|XMSN|CODE|ALPHA|SOURCE | | |DEFINITION| OPER RANGE | |BIT | |INTV| |CODE |ORIGIN | | |(*=REMARK)| RESOLUTION | | | | | | |BUS No.| | |(X=NOTE) | ACCURACY | | | | | | |ATA REF| | | | | | | | | | |CONV | -------------------------------------------------------------------------------| 1 356 01 |MAINTENAN-| | | | |100 |ISO5| |LGCIU | | 2 356 10 |CE | | | | | | | |1/2 | | |MESSAGES | | | | | | | | | |--------------|----------|------------|----|----|----|----|----|---- |1,2,3 | | 1 377 01 |EQPT |bits 11-14 | | |2(1)|100 |HEX | | | | 2 377 10 |IDENT |low part | | | | | | |32-31- | | | |bits 15-18 | | | | | | |00 | | | |high part | | | | | | | | | | |bits 19-29 | | | | | | | | | | |logic '0' | | | | | | | | |--------------|----------|------------|----|----|----|----|----|-----|-------| |Remarks: | |(1) = Significant Data Digits | |-----------------------------------------------------------------------------|
**ON A/C ALL
6. Component Description
_____________________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
A. Cockpit Panel
(Ref. Fig. 005, 006, 007)
(1) ECAM WHEEL Page
The ECAM system uses L/G position data to give the WHEEL page display on the lower ECAM DU. The data from the two systems is used to make an analysis, to give these indications:
(a) Normal Indications
The ECAM WHEEL page shows three sets of colored indicators. Each set of indicators has:
1EFF : ALL 1 32-61-00Page 23 1 1 Aug 01/05 1 1 1CES 1
Landing Gear Position Indicator Lights (8GB/9GB/10GB) Figure 005
1EFF : ALL 1 32-61-00Page 24 1 1 Feb 01/05R 1 1 1CES 1
ECAM Display Figure 006
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1201-299, 301-399, 1 1CES 1 111 32-61-00 Page 25 Aug 01/05
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架9(81)
