-
the MCDU shows the L/G menu.
-
the MCDU shows the LGCIU 1 menu.
-
the MCDU shows the LGCIU 1 TEST menu
-
the LGCIU 1 TEST menu shows 'test wait (10 secs)'
-when the tests are completed, the LGCIU 1 TEST menu shows 'test OK'.
-
the MCDU shows the L/G menu.
-
the MCDU shows the LGCIU 2 menu.
-
the MCDU shows the LGCIU 2 TEST menu
-
the LGCIU 2 TEST menu shows 'test wait (10 secs)'
-when the tests are completed, the LGCIU 2 TEST menu shows 'test OK'.
1EFF : ALL 1 32-69-00Page 503 1 1 Aug 01/00 1 1 1CES 1
5. Close-up
________ Subtask 32-69-00-862-050
A. De-energize the Electrical Circuits
(1) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
Subtask 32-69-00-942-052
B. Removal of Equipment
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the safety barriers.
(3)
Remove the warning notice(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 32-69-00Page 504 1 1 Aug 01/00R 1 1 1CES 1
TASK 32-69-00-860-001
Simulation of Flight, with the Aircraft on the Ground
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
R To simulate the landing gear system in the flight configuration, with the aircraft weight on the wheels.
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
No specific warning notice
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-32-00-860-009 Procedure to Get Access to the SYSTEM REPORT/TEST/L/G Page 32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears
32-00-00-860-001 Flight Configuration Precautions
32-00-00-860-002 Ground Configuration after Flight Configuration
1EFF : ALL 1 32-69-00Page 505 1 1 Aug 01/00 1 1 1CES 1
3. Job Set-up
__________
Subtask 32-69-00-941-051
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-make sure that the landing-gear control-lever 6GA is in the DOWN position
-put a warning notice in position to tell persons not to operate the landing gear.
Subtask 32-69-00-869-054
B. Flight Configuration Precautions R (1) Do the flight configuration precautions procedure (Ref. TASK 32-00-
00-860-001).
Subtask 32-69-00-865-056
C. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU COM NAV/RAD ALTM/2 1SA2 K12 121VU COM NAV/RAD ALTM/1 1SA1 K11
1EFF : ALL 1 32-69-00Page 506 1 1 Nov 01/03 1 1 1CES 1
4. Procedure
_________ Subtask 32-69-00-869-055 R A. Simulation of Flight Procedure (with the Aircraft on the Ground) -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架9(110)
