Subtask 32-51-00-740-056
B. Bite Test
(1) Do the Bite test of the BSCU (Ref. TASK 32-46-00-740-001). Subtask 32-51-00-942-063
C. Remove the Equipment
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Remove the access platform(s).
(3)
Remove the warning notice(s).
(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R 1EFF : 005-049, 055-099, 101-149, 151-199, 1 32-51-00Page 596 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C 001-004, 051-054,
TASK 32-51-00-820-002
Adjustment of the NWS "Zero" Position with the Adjusting Tool F26630200 for A/C with NWS Sensor (3GC,4GC) P/N C24763000, NLG Centering Cams as Reference
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Do this procedure when you adjust a gear box P/N C24764000 with the adjusting tool F26630200 and when you use the NLG centering cams as reference.
R
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning placard
No specific AC voltmeter (minimum range: 0-20V, accuracy: 1 mV,
frequency: 50-2000 Hz)
No specific Torque Wrench : range 0.00 to 1.20 m.daN
(0.00 to 9.00 lbf.ft)
F26630200 1 ADJUSTING TOOL - NWS GEARBOX
F26792000 1 SENSOR-VOLTAGE TEST
F26792000-1 1 SENSOR - VOLTAGE TEST
1EFF : 001-004, 051-054, 1 32-51-00Page 597 1 1 Aug 01/05 1 1 1CES 1 B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-015 USA BAC 5001 DACO-5073
GREASE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-003 Lifting of the Aircraft at Forward Jacking Point, MLG Wheels on the Ground
07-11-00-586-001 Lowering of the Aircraft at Forward Jacking Point,
MLG Wheels on the Ground
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
External Power 29-10-00-864-001 Depressurize the Green Hydraulic System 32-46-00-740-001 BITE Test of the BSCU 32-51-19-000-001 Removal of the Nose Wheel Steering Feedback Sensor
(3GC, 4GC) P/N C24763000 32-51-19-400-001 Installation of the Nose Wheel Steering Feedback
Sensor (3GC, 4GC) P/N C24763000
32-51-00-991-012 Fig. 509
32-51-00-991-013 Fig. 510
3. Job Set-up
__________
Subtask 32-51-00-941-053
A. General
(1) Put a warning placard in the cockpit to tell persons not to operate R the landing gear or the N/WS.
(2)
On the panel 400VU, make sure that the L/G normal control lever is in the DOWN position.
(3)
On the nose gear leg, on the nose wheel steering deactivation electrical box, make sure that the towing lever is in the normal position (engaged position).
1EFF : 001-004, 051-054, 1 32-51-00Page 598 1 1 Aug 01/05 1 1 1CES 1
(4) Make sure that the N/WS handwheels and the rudder pedals are in the neutral position.
Subtask 32-51-00-860-067
B. Aircraft Maintenance Configuration
(1)
Jack up the front of the aircraft (Ref. TASK 07-11-00-581-003). NOTE : In the fully extended position of the shock absorber, the NLG
____ is automatically centered (the nose wheel steering is in the zero position).
(2)
Make sure that the Green hydraulic system is de-pressurized (Ref. TASK 29-10-00-864-001).
(3)
Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架9(11)
