(0.00 to 9.00 lbf.ft) No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific lockwire corrosion resistant steel 0.8 mm (0.03 in)
Material No. 05-047 C Z-11.904 ANTI COR. COMPOUND(HIGH TEMP.SILICONE SEALANT) (Ref. 20-31-00)
Material No. 09-001 USA MIL-S-8802 TYPE I CLASS A FUEL TANK SEALANTPOLYSULFIDE (Ref. 20-31-00)
Material No. 11-004A 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
1EFF : ALL 1 32-51-51Page 406 1 1 Aug 01/05R 1 1 1CES 1
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 32-51-00-720-003 Functional Test of the Nose Wheel Steering with the
Handwheel. 32-51-00-720-004 Functional Test of the Nose Wheel Steering with the Pedals. 32-51-51-991-001-A Fig. 401
3. Job Set-up
__________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
Subtask 32-51-51-860-053
A. Aircraft Maintenance Configuration
(1)
Make sure that the Green hydraulic system is depressurized and put it in the maintenance configuration. (Ref. TASK 29-00-00-864-001)
(2)
Make sure that the reservoir of the Green hydraulic system is depressurized (Ref. TASK 29-14-00-614-001).
(3)
In the cockpit, on the panel 400VU, make sure that the warning notice(s) is (are) in position to tell persons not to operate the landing gear control lever.
(4)
On the steering handwheels (CAPT and F/0) and on the brake pedals, make sure that the warning notice(s) is (are) in position to tell persons not to operate them.
(5)
Make sure that the warning notice(s) is (are) in position to tell persons not to pressurize the Green hydraulic system: - on the panel 40VU in the cockpit, - on the ground service panel of the Green hydraulic system, access
door (197CB).
(6)
Make sure that the safety barriers are in position.
1EFF : ALL 1 32-51-51Page 407 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 32-51-51Page 408 1 1 Aug 01/05 1 1 1CES 1
(7) Make sure that the container is in position below the servo-control.
R **ON A/C 401-499,
R Subtask 32-51-51-860-053-A
R A. Aircraft Maintenance Configuration
R (1) Make sure that the Yellow hydraulic system is depressurized and put
R it in the maintenance configuration.
R (Ref. TASK 29-00-00-864-001)
R (2) Make sure that the reservoir of the Yellow hydraulic system is
R depressurized (Ref. TASK 29-14-00-614-001).
R (3) In the cockpit, on the panel 400VU, make sure that the warning
R notice(s) is (are) in position to tell persons not to operate the
R landing gear control lever.
R (4) On the steering handwheels (CAPT and F/0) and on the brake pedals,
R make sure that the warning notice(s) is (are) in position to tell
R persons not to operate them.
R (5) Make sure that the warning notice(s) is (are) in position to tell
R persons not to pressurize the Yellow hydraulic system:
R - on the panel 40VU in the cockpit,
R - on the ground service panel of the Yellow hydraulic system, access
R door (196BB)
R (6) Make sure that the safety barriers are in position.
R (7) Make sure that the container is in position below the servo-control.
R **ON A/C ALL
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM LANDING GEAR 起落架9(66)