• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-22 06:49来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 Replacement of the Pylon Engine Fuel Feed Pipe Seals
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS


 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 WARNING : DO NOT GET AIRCRAFT FUEL:
_______
 -
IN YOUR MOUTH

 -
IN YOUR EYES


 -ON YOUR SKIN FOR A LONG TIME.
 AIRCRAFT FUEL IS POISONOUS.

 WARNING : YOU MUST USE THE NECESSARY PRECAUTIONS TO PREVENT INJURY FROM HEAT.
_______ THE LOCATION FOR THIS TASK CAN BE VERY HOT.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 282100-07
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific warning notice
 No specific access platform 1.5 m (4 ft. 11 in.)

 1EFF : ALL 1 28-20-00Page 401 1 1 Nov 01/04 1 1 1CES 1 B. Consumable Materials


 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-012 Material No. 19-010
C. Expendable Parts
USA VV-P-236 PURE MINERALVASELINE OR PETRO- LATUM (Ref. 20-31-00)USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
 -------------------------------------------------------------------------------
FIG.ITEM --------- |DESIGNATION ------------------------------------ |IPC-CSN----------------------------------
10  O-rings  28-21-06 01 -100
 13  O-rings  28-21-06 01 -170
 14  O-rings  28-21-06 01 -070
 D. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
20-28-00-912-002  Electrical Bonding of Components With Conductive Bolts and Screws in the Tanks
 24-41-00-861-002  Energize the Aircraft Electrical Circuits from the External Power
 24-41-00-862-002  De-energize the Aircraft Electrical Circuits Supplied from the External Power
 28-00-00-910-001 28-21-00-790-002 31-60-00-860-001  Fuel Safety ProceduresVisual Check of Pipes, Couplings and LP Valve External to Tank From Front Spar to HP Valve For Leaks With Booster Pump On and LP Valve OpenEIS Start Procedure
 31-60-00-860-002 71-00-00-710-002 73-11-10-000-004  EIS Stop ProcedureWet Motoring CheckRemoval of the Fuel Filter Element
 73-11-10-400-004  Installation of the Fuel Filter Element
 78-30-00-040-040 78-30-00-440-040  Deactivation of the Thrust Reverser SystemReactivation of Thrust Reverser
 28-20-00-991-001  Fig. 401

 1EFF : ALL 1 28-20-00Page 402 1 1 Nov 01/04 1 1 1CES 1


 3. Job Set-up
__________ Subtask 28-20-00-941-050
 A. Safety Precautions
 WARNING : OBEY THE FUEL SAFETY PROCEDURES.

_______
 (1)
 Put the safety barriers in position.

 (2)
 You must obey the fuel safety procedures when you do work on the fuel system (Ref. TASK 28-00-00-910-001).


 Subtask 28-20-00-860-050
 B. Aircraft Maintenance Configuration
 (1)
 Deactivate the thrust reverser system (Ref. TASK 78-30-00-040-040).

 (2)
 Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.

 (3)
 Put a warning notice in position to tell persons not to energize the FADEC 1(2).

 (4)
 Use external power to energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).

 (5)
 Do the EIS start procedure (ECAM only) (Ref. TASK 31-60-00-860-001), then: - on the ECAM control panel (CP), push in the FUEL pushbutton switch


 (P/BSW)
 -make sure that the engine LP valves are shown closed (amber cross-line) on the ECAM lower display unit (DU).
 Subtask 28-20-00-865-050
 C. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FUEL/LP VALVE/MOT1/ENG2 2QG A09
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FUEL 燃油2(96)