曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
and we are too heavy to make FL310 just yet. That is why the altitude menus are as they are.
If we designed the menus per actual aircraft altitude at the time of request, to get the FL280
request in we would have to request FL230 or below, then higher to FL280. Hardly realistic.
What is the difference between Change of Destination (COD) and Alternate Destination
handling in Radar Contact?
Planned Alternate = Normal Operations
Change of Destination = Irregular Operations
Alternates are planned to comply with Federal Air Regulations (FARs) for weather and/or
company operational requirements. In the situation where more than one alternate is planned,
the fuel is calculated to the more distant of the two alternates.
Change of Destination may be used in a situation that does not quite qualify as an emergency
but requires a landing at an airport other than the planned alternate or the intended destination.
An example scenario: You are enroute and the aircraft starts exhibiting signs of unusual
airframe vibrations. Aircraft control remains normal. Rather than waiting for the situation to
escalate to an emergency situation you and your first officer elect to land at the nearest
suitable airport for inspection. The COD function in Radar Contact is perfectly suited for this
type of scenario.
Of course, if things do take a turn for the worse during descent you can always declare an
emergency on the way in to your COD airport!
I cannot get Radar Contact to run. The Controller Info and Start RC boxes are grayed out
after I select a flight plan.
Radar Contact FAQs
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 276
Check and make sure you are not running Radar Contact in Windows 98/ Windows ME
compatibility mode. In Windows XP Pro service pack 1 if you put RC into Windows 98/
Windows ME compatibility mode then RC will break.
During some of my flights, particularly when I am flying the FS prop aircraft, my co-pilot
seems to drift further and further off course.
In FS, go to Aircraft/Realism Settings, ensure the Gyro slider is set at 0 under Flight Model,
and uncheck Gyro Drift.
I put my Saved files on another machine I own and they do not work.
You cannot put saved files from one machine on another. Your Saved flights will work only
on the machine they are created on.
I have got a mess. There are so many Saved files now, it is time to clean house.
Each time you Save a flight, that action produces three necessary files. If you name a Saved
file “a Practice approach”, it will produce:
A Practice approach.rcd (in your \My Documents\Flight Simulator Files)
A Practice approach.flt (in your \My Documents\Flight Simulator Files)
A Practice approach.wx (in your \My Documents\Flight Simulator Files)
To really “clean house”, delete all three files. For organizational purposes, we suggest
beginning each Saved file with a letter - a single letter. If you save multiple times in a given
flight, it pays to use the same letter at the beginning of each file for that given flight.
For instance, one flight might be KJFK-KLAX, and you save 5 times at various spots during
the flight. Begin each Saved file name with “a”. Your next flight is KORD-KMIA, and you
save 3 times at various spots. Begin each Saved file name with “b”.
This process serves two purposes:
Makes it very easy to spot the file you are after when you Load.
Makes it incredibly easy to find what files to delete from \Saved and \flights\myflts.
I just formatted my hard drive and reinstalled Radar Contact. It will not accept my key. Why?
When you format or replace your hard drive, to Radar Contact the machine
looks like an unregistered copy of Radar Contact is running. So it asks for a
new key. The first time you run Radar Contact the Registration screen will
appear. Please enter your First Name and Last Name where indicated. Next
click on the box that says "Click here to Email Registration Information to
JDTLLC." Your email program will prepare a properly formatted email message
addressed to register@jdtllc.com. All you need to do is click the send
button in your email program. When we receive your request we will send you
a new activation key.
If you use web based email programs such as Yahoo or Hotmail a properly
Radar Contact FAQs
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 277
formatted message cannot automatically be prepared. You must do it
manually. Manually prepare a message addressed to register@jdtllc.com with a
subject of RCv4 Key Request. In the body of the message copy/paste your
Product ID code. The Product ID code is the series of numbers in the box on
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料15(149)
