曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
more variety you will have during your flight.
For the Pilots‟ Co-Pilots‟ and Controllers‟ tabs, there is a slider under each voice. As you
move the slider to the right, the delay between words and phrases will become more obvious.
There is a Master Slider on each tab, which moves all sliders at once. You adjust each voice
individually, and click the button to hear how your slider setting sounds.
The Pilot‟s and Co-Pilot‟s sliders will move together. In other words, if you select John
Dekker as Pilot, and set the slider to position 2, the corresponding Co-Pilot slider will be set
to 2.
Radar Contact Radar Contact User Interface
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 116
On the Chatter pilots‟ tab, you can choose the voices you hear when controllers talk to AI
planes, or when the AI planes contact the controller. Again, the more voices selected the
better.
If you choose a pilot or co-pilot which has a controller by the same name selected, you will
see the following warning:
It might be a good idea to choose a different pilot or co-pilot, or unselect the controller.
If you would like to be part of the RC environment and record a pilot or controller script,
contact rick@jdtllc.com
Special thanks to all of those that took the time and recorded for version 4.
Utilities
Rebuild Scenery Database
Before you start using Radar Contact for the first time, you will need to rebuild the scenery
database. This scans your scenery files, and extracts the airport and runway information, and
builds the Airport and Runway databases. This assures that all of your airports and runways
are available when you use Radar Contact.
When you add new scenery, or remove scenery, it would be a good idea to rebuild your
scenery database.
If you are running RC on a WideFS configured machine, there are a few additional things you
need to know.
The file Makerwys.exe should be located in the main Flight Simulator folder. Run it
and it creates a file r4.csv in the main Flight Simulator folder which contains the
runway information which RC needs for all the active sceneries in your scenery.cfg
file.
Now run RC on the widefs machine.
On the RC main screen click the „Rebuild Scenery DB‟ button and answer „yes‟ when
asked „Is this a widefs configuration‟.
You will be reminded to run makerwys.exe on the FS machine. If you have done so
click OK.
At the next screen enter the network path to your main Flight Simulator folder.
RC will now copy the r4.csv file from your Flight Simulator folder into the RCv4\data
folder and will then rebuild the airport database (a4.csv). You will receive several
Radar Contact Radar Contact User Interface
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 117
messages telling you what is happening. Keep clicking okay until the process is
completed.
Thanks to Peter Dowson for this nifty little utility!
Check for Updates
Occasionally we will release updated data files, or even the executable itself. By selecting the
“Check for Updates” button will query our web server for updates. If any are available, they
will be downloaded and installed.
If this function does not behave correctly, make sure your firewall is allowing RCV4.EXE to
contact www.jdtllc.com.
Radar Contact Radar Contact User Interface
Version 4 December 2, 2007
Copyright JDT LLC 2005 Page 118
Debug
When you are experiencing a problem that cannot be corrected by email correspondence, we
may ask you to run your problematic flight with “Debug” on. If you are asked to do this,
click the button before loading your flight plan. When you click it, the following dialog box
will appear:
This is just a friendly reminder that by selecting debug, performance may be impacted, and a
large log file will be created.
About
This button displays information about your version of Radar Contact. If you click this
button, the following dialog box appears:
Save/Load
There is one more button to cover on the main screen: Load Previously Saved .RCDs .
An .RCD file is a file that has been saved while flying with RC. Saving the RCD file can be
accomplished in three ways. You can use the default RC key ctrl-shift-; (semi-colon) or using
the Flight Simulator menu (Flights/Save Flight) or use the default Save Flight key; (semicolon).
If you use the latter two, you can specify a file name, which is indicative of your
situation, such as “KSDF rwy 17L Apch”.
Radar Contact Radar Contact User Interface
Version 4 December 2, 2007
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料15(106)
