曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
toolbar button of Manual Explorer.
Figure 161: Dialog box “Insert new structural element”
“Insert new structural element” dialog box is displayed with pre-selected destination.
He may choose the type of element he wants to insert:
• A Folder,
• A Group,
• Or an Invariant.
The user may insert the new element “Before”, “After” or “as a child” regarding his
selection. The following rules apply to the destination.
Required
« Flight Ops Doc
Manager »
User Guide
Reference: UG0600624
Issue: 7.1
PAGE 147/276
© AIRBUS S.A.S 2009. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of AIRBUS S.A.S. No intellectual
property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express
written consent of AIRBUS S.A.S. This document and its content shall not be used for any purpose other than that for which it is supplied.
To insert a new PSL, the following combinations are available:
Selected Item Insert Before Insert After Insert As child
Root Node No No Yes
PSL Yes Yes Yes
GDU Yes Yes No
Invariant Yes if parent of the
selected invariant is
a PSL, No otherwise.
Yes if parent of the
selected invariant is
a PSL, No otherwise.
No
To insert a new GDU, the following combinations are available:
Selected Item Insert Before Insert After Insert As child
PSL Yes if parent of the
selected PSL is a
PSL, N otherwise.
Yes if parent of the
selected PSL is a
PSL, N otherwise.
Yes
GDU Yes Yes No
Invariant Yes if parent of the
selected invariant is
a PSL, No otherwise.
Yes if parent of the
selected invariant is
a PSL, No otherwise.
No
To insert a new invariant, the following combinations are available:
Selected Item Insert Before Insert After Insert As child
PSL Yes if parent of the
selected PSL is a
PSL, No otherwise.
Yes if parent of the
selected PSL is a
PSL, No otherwise.
Yes
GDU Yes Yes Yes
Invariant Yes Yes No
The Title field is mandatory.
4.2.1.7.2 New Document Unit solution
The functionality “New Document Unit solution” enables users to insert a new Document Unit
Solution.
Activation condition:
The connect user must be authenticated with on of those available profile:
Manual responsible profile
• Author profile
The Manual Explorer is displayed on an opened manual.
The Working tab is selected.
A Document Unit Solution or an Invariant is selected.
« Flight Ops Doc
Manager »
User Guide
Reference: UG0600624
Issue: 7.1
PAGE 148/276
© AIRBUS S.A.S 2009. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of AIRBUS S.A.S. No intellectual
property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express
written consent of AIRBUS S.A.S. This document and its content shall not be used for any purpose other than that for which it is supplied.
Description:
The user may activate “New Document Unit solution” functionality by the menu item “Solution”.
Figure 162: Manual Explorer, Menu item “Solution”
Alternatively, the user may activate the “Solution” functionality by the toolbar button
of Manual Explorer.
Figure 163: Manual Explorer, “Insert new Document Unit” dialog box
The permission to insert element on other depend on where the insertion will be done.
“Insert new Document unit” dialog box is displayed with pre-selected “As child” check
box if the selected item is an Invariant. If the selected item is a Solution the dialog is
displayed with location checked “Before” or “After” and “As child” check box disabled.
The user must choose the template of the element he wants to insert with the “Template”
combo box. This list displays all the available templates corresponding to the format of
the manual. Each template is associated with a type of document.
The Title field is mandatory.
For an AFM manual, Document Unit can be inserted only in an invariant whose “origin”
metadata is “operator” or in an invariant whose “origin” metadata is “airbus” without
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
“Flight Ops Doc Manager”User Guide(52)
