• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-02 23:44来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

MASK BOX A
HEAT SENSITIVE
RELEASE COLOR BAND
PIN
SEE B
RELEASE CABLE GENERATORMASK (EXAMPLE)LANYARD (EXAMPLE)
OXYGEN GENERATOR
EACH PSU CONTAINS
B
THREE OR FOUR
OXYGEN MASKS

Passenger Service Unit (PSU) Oxygen Mask Installation
Figure 402

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 35-22-31
 ALL  ú ú 01 Page 406 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 014-005
 (3)  To remove the mask box cover, do the step that follows:
 (a)  Carefully lift the cover away from the mask box.
 S 824-006
 (4)
Pull the release cable through the slot into the mask box.

 S 824-007

 (5)  
Move the release cable through and away from the mask lanyard rings.

 S 014-008

 (6)  
Remove the mask tubing from the manifold outlets.

 S 024-009

 (7)  
Remove the masks.

 S 164-010

 (8)  
If you install the same mask, make sure you clean the masks (Ref 35-22-31/701).


 TASK 35-22-31-404-056
 3. PSU Oxygen Mask Installation
____________________________
 A. Standard Tools and Equipment
 (1)  Rod or Tool - 0.125 inch diameter
 B. References
 (1)  
35-22-31/201, Oxygen

 (2)  
35-22-31/701, Oxygen


 C. Access
 (1)  Location Zone
 100 Upper Half of the Fuselage

 D. Procedure - Install the Oxygen Masks
 S 424-011
 (1) Connect the mask tubing on the manifold outlets (Fig. 401).
 (a) Push the mask tubing fully on the manifold outlets.
 NOTE: If the oxygen box is not installed on the
____ airplane a heat gun can be used to make it easier to install (AMM 20-10-27/201).
 S 864-012
 (2)  Pack the oxygen masks (Ref 35-22-31/201).
 TASK 35-22-31-004-059
 4. Attendant's and Lavatory Oxygen Mask Removal
____________________________________________
 A. Standard Tools and Equipment
 (1)  Rod or Tool - 0.125 inch diameter
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 35-22-31
 ALL  ú ú 03 Page 407 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 B. References
 (1)  
35-22-11/201, Oxygen

 (2)  
35-22-11/401, Oxygen

 (3)  
35-22-31/701, Oxygen


 C. Access
 (1)  Location Zone
 100 Upper Half of the Fuselage

 D. Prepare to Remove the Oxygen Masks
 S 014-016
 (1)  If the forward or the aft left attendant's mask box door is closed, do the steps that follow (Fig. 405):
 (a)  
Put an 1/8-inch rod into the access hole in the service unit.

 (b)  
Push the rod and release the door latch.

 (c)  
Permit the oxygen masks to fall.


 S 014-019
 (2)  If the door of the lavatory or the aft aisle right attendant's mask box is closed, do the steps that follow (Fig. 405):
 (a)  
Put a flat tool into the latch access hole, adjacent to the test stop button.

 (b)  
Push the tool and release the door latch.

 (c)  
Permit the oxygen masks to fall.


 S 214-020
 (3)  To see if the generator fired, do the steps that follow:
 (a)  
When fired, the heat sensitive band on the generator is a black color.

 (b)  
When the heat sensitive band on the generator is not a black color, the generator did not fire.


 S 044-021
 (4)  Before you install the generator that did not fire, deactivate the generator (Ref 35-22-11/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 氧气 OXYGEN(57)