11HA2)
AMM 36-11-58-400-001 Installation of the HP Bleed Override Solenoid
(11HA1, 11HA2)
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the BMC1 (Ref. AMM TASK 36-11-00-740-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message:
BMC1 OR SOLENOID 11HA1
NOTE : If the maintenance message BMC1 OR SOLENOID 11HA1 comes into view
____ with no associated ECAM warning, no trouble shooting procedure is necessary.
-replace the BMC-1 (1HA1) (Ref. AMM TASK 36-11-34-000-001) and (Ref. AMM TASK 36-11-34-400-001).
(1) If the fault continues:
-replace the SOL-HP BLEED OVERRIDE, ENG1 (11HA1) (Ref. AMM TASK 36-11-58-000-001) and (Ref. AMM TASK 36-11-58-400-001).
B. Do the test given in para. 3.
1
R -EFF : 151-199, 401-499,
-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page B214
--Aug 01/05 ---CES - BMC2 output failure for HP Bleed Override Solenoid of Engine 2
1. Possible Causes
_______________
-BMC-2 (1HA2)
-SOL-HP BLEED OVERRIDE, ENG2 (11HA2)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 36-11-00-740-001 BITE Test of the BMC 1(2)
AMM 36-11-34-000-001 Removal of the BMC (1HA1, 1HA2)
AMM 36-11-34-400-001 Installation of the BMC (1HA1, 1HA2)
AMM 36-11-58-000-001 Removal of the HP Bleed Override Solenoid (11HA1,
11HA2) AMM 36-11-58-400-001 Installation of the HP Bleed Override Solenoid (11HA1, 11HA2)
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the BMC2 (Ref. AMM TASK 36-11-00-740-001).
4. Fault Isolation
_______________
A. If the test gives the maintenance message:
BMC2 OR SOLENOID 11HA2
NOTE : If the maintenance message BMC2 OR SOLENOID 11HA2 comes into view
____ with no associated ECAM warning, no trouble shooting procedure is necessary.
-replace the BMC-2 (1HA2) (Ref. AMM TASK 36-11-34-000-001) and (Ref. AMM TASK 36-11-34-400-001).
(1) If the fault continues:
-replace the SOL-HP BLEED OVERRIDE, ENG2 (11HA2) (Ref. AMM TASK 36-11-58-000-001) and (Ref. AMM TASK 36-11-58-400-001).
B. Do the test given in para. 3.
1
R -EFF : 151-199, 401-499,
-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page B215
--Aug 01/05 ---CES - TASK 36-11-00-810-936
HP Bleed Valve blocked in the closed position or regulation too low on Engine 1 without associated maintenance message
1.
Possible Causes
_______________
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
36-11-00-810-837 Failure of the HP Bleed Valve of the Engine 1 Blocked in the Closed Position
3. Fault Confirmation
__________________
A. Do the Last Leg Report Test of the BMC 1
4. Fault Isolation
_______________
A. If the Last Leg Report Test of the BMC 1 shows the maintenance message: 36-11-51 HP BLEED-V 4000HA1 OR SENSE LINE
-do the following trouble shooting procedure (Ref. TASK 36-11-00-810-837)
1
-EFF : ALL
-∞∞36-11-00∞∞∞∞∞∞∞∞∞∞Page B216
--Feb 01/05R ---CES -
HP Bleed Valve blocked in the closed position or regulation too low on Engine 2 without associated maintenance message
1.
Possible Causes
_______________
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
36-11-00-810-838 Failure of the HP Bleed Valve of the Engine 2 Blocked in the Closed Position
3. Fault Confirmation
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 PNEUMATIC(91)