3.
On the panel 30VU:
-push the APU BLEED pushbutton switch.
4.
On the panel 30VU:
-push the APU BLEED pushbutton switch.
5.
Stop the APU (Ref. AMM TASK 49-00-00-860-009).
On the panel 30VU:
-the ON legend on the APU BLEEDpushbutton switch comes on.
NOTE : The APU supplies bleed-air after
____ approx. 5 seconds.
On the SD:
-
the APU bleed-valve symbol shows the APU bleed valve in the open (GREEN) position.
On the panel 30VU:
-
the ON legend on the APU BLEEDpushbutton switch goes off.
On the SD:
-
the APU bleed-valve symbol shows the APU bleed valve in the closed (GREEN) position.
1
R -EFF : ALL
-∞∞36-12-00∞∞∞∞∞∞∞∞∞∞Page 203
--May 01/05 ---CES -R **ON A/C 051-099,
R C. Test
R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. Do the self test of the ECB (Ref.
R AMM TASK 49-00-00-710-001).
R 2. Start the APU (Ref. AMM TASK 49-R 00-00-860-003).
R 3. On the panel 30VU:
R - push the APU BLEED pushbutton
R switch.
R
R
R
R
R
R
R 4. On the panel 30VU:
R - push the APU BLEED pushbutton
R switch.
R
R
R
R
R 5. Stop the APU (Ref. AMM TASK 49-R 00-00-860-004).
On the panel 30VU:
-the ON legend on the APU BLEED pushbutton switch comes on.
NOTE : The APU supplies bleed-air after
____ approx. 5 seconds.
On the SD:
-
the APU bleed-valve symbol shows the APU bleed valve in the open (GREEN) position.
On the panel 30VU:
-
the ON legend on the APU BLEED pushbutton switch goes off.
On the SD:
-
the APU bleed-valve symbol shows the APU bleed valve in the closed (GREEN) position.
1
R -EFF : 051-099,
-∞∞36-12-00∞∞∞∞∞∞∞∞∞∞Page 204
--May 01/05 ---CES -R **ON A/C 106-149, 211-299, 301-399, 401-499,
C. Test
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Do the self test of the ECB (Ref. AMM TASK 49-00-00-710-005).
2.
Start the APU (Ref. AMM TASK 49-00-00-860-005).
3.
On the panel 30VU:
-push the APU BLEED pushbutton switch.
4.
On the panel 30VU:
-push the APU BLEED pushbutton switch.
5.
Stop the APU (Ref. AMM TASK 49-00-00-860-006).
**ON A/C ALL
4. Fault Isolation
_______________On the panel 30VU:
-the ON legend on the APU BLEEDpushbutton switch comes on.
NOTE : The APU supplies bleed-air after
____ approx. 5 seconds.
On the SD:
-
the APU bleed-valve symbol shows the APU bleed valve in the open (GREEN) position.
On the panel 30VU:
-
the ON legend on the APU BLEEDpushbutton switch goes off.
On the SD:
-
the APU bleed-valve symbol shows the APU bleed valve in the closed (GREEN) position.
**ON A/C 001-049, 101-105, 151-199, 201-210,
A. If the self test gives the maintenance message:
-DIFFERENTIAL PRESS XDCR P24 (Ref. TASK 49-00-81-810-853),
-TOTAL PRESS XDCR P23 (Ref. TASK 49-00-81-810-854),
-SURGE CTL VALVE P18 (Ref. TASK 49-00-81-810-871),
-INLET GUIDE VANE ACTR P21 (Ref. TASK 49-00-81-810-851),
1 -EFF : ALL
-∞∞36-12-00∞∞∞∞∞∞∞∞∞∞Page 205
--Aug 01/05 ---CES -
-LOAD CTL VALVE P12 (Ref. TASK 49-00-81-810-855).
**ON A/C 051-062,
A. If the self test gives the maintenance message:
-DIFFERENTIAL PRESS XDCR P24 (Ref. TASK 49-00-00-810-827),
-TOTAL PRESS XDCR P23 (Ref. TASK 49-00-00-810-828),
-SURGE CTL VALVE P18 (Ref. TASK 49-00-00-810-830),
-INLET GUIDE VANE ACTR P21 (Ref. TASK 49-00-00-810-824),
-LOAD CTL VALVE P12 (Ref. TASK 49-00-00-810-829).
**ON A/C 063-099,
A. If the self test gives the maintenance message:
-DIFFERENTIAL PRESS XDCR (8043KM) (Ref. TASK 49-00-00-810-827),
-TOTAL PRESS XDCR (8044KM) (Ref. TASK 49-00-00-810-828),
-SURGE CTL VALVE (8058KM) (Ref. TASK 49-00-00-810-830),
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 PNEUMATIC(105)