(2)
Install the insulation blankets (Ref. TASK 25-80-00-400-001).
(3)
Install the riser duct and cabin air outlet assembly (Ref. TASK 21-20-00-410-001).
(4)
Install the cove light panels (Ref. TASK 25-23-48-400-001).
(5)
Install the sidewall linings 241CW, 241LW, 242CW, 242LW (Ref. TASK 25-23-47-400-001).
(6)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R EFF : 001-049, 051-099, 101-149, 151-199, 53-31-00Page A614 201-299, 401-499, Aug 01/05
CES
Frame Flanges at FR40 and FR41, between STGR12 and STGR21, and Longitudinal Beam Flange at STGR20A, between FR40 and FR41, LH/RH Figure 624A/TASK 53-31-00-991-033-A
CES
R **ON A/C 151-199, 401-499,
Subtask 53-31-00-410-084-A
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the insulation blankets (Ref. TASK 25-80-00-400-001).
(3)
Install the riser duct and cabin air outlet assembly (Ref. TASK 21-20-00-410-001).
(4)
Install the cove light panels (Ref. TASK 25-23-48-400-001).
(5)
Install the sidewall linings 241FW, 242FW (Ref. TASK 25-23-47-400-001).
(6)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 53-31-00-862-057
B. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
R EFF : 001-049, 051-099, 101-149, 151-199, 53-31-00Page A616 201-299, 401-499, Aug 01/05
CES R **ON A/C ALL
TASK 53-31-00-210-029
Detailed Visual Inspection of Side Box Beam in Area of Attachment to FR46, LH/RH
1. Reason for the Job
__________________
Refer to the MPD TASK: 533143-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific flashlight
No specific lint free cloth
No specific warning notice
No specific access platform 1.5 m (4 ft. 11 in.)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
32-12-00-010-001 Open the Main Gear Doors for Access
32-12-00-410-001 Close the Main Gear Doors after Access
ASRM 53-35-11-201 (for corrective action)
53-31-00-991-032 Fig. 625
3. Job Set-up
__________ Subtask 53-31-00-010-087
A. Get Access WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______
BEFORE YOU START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE
_______
LANDING GEAR.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR ARE CLEAR.
_______
(1)
Open the MLG doors (Ref. TASK 32-12-00-010-001).
(2)
Put the warning notice in position to tell persons not to operate the landing gear.
(3)
Put the access platform in position below the MLG compartment.
(4) Take a flashlight to do the inspection. Subtask 53-31-00-110-079
B. Cleaning Procedure WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
EFF : ALL 53-31-00Page A618
May 01/04
R
CES
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身2(71)
