A320飞机维护手册 AMM FUSELAGE 机身2(66)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (2) Do a general visual inspection of the MLG bay including the MLG door hinges for corrosion and other damage.
 (3) If necessary, refer to the ASRM: - (Ref. ASRM 53-31-16-001), - (Ref. ASRM 53-31-29-001), - (Ref. ASRM 53-35-11-001), - (Ref. ASRM 53-36-11-001) for the correct repair procedures. 
R R R  (4) Apply STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the MLG bay and the MLG door hinges.
 5. Close-up________
 Subtask 53-31-00-410-068
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Remove the access platform(s).
 (3) Close the MLG doors (Ref. TASK 32-12-00-410-001).
 (4) Remove the warning notice(s).
 (5) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 EFF : ALL
53-31-00Page 694

 TASK 53-31-00-210-025
 Detailed Visual Inspection of Fuselage Skin, between FR35 and FR36 and between Stringer 25 and Stringer 30, LH/RH, External Surface
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 533141-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific adjustable access platform No specific lint free cloth No specific warning notice 98D27803000000 2 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
53-35-11-000-001 Removal of the Wing-to-Fuselage Fairings 53-35-11-400-001 Installation of the Wing-to-Fuselage Fairings 53-35-13-000-002 Removal of the Quick-Release Access Panels from the
 Belly Fairing Structure 53-35-13-400-002 Installation of the Quick-Release Access Panels on
 the Belly Fairing Structure ASRM 53-00-11-201 (for corrective action) ASRM 53-31-11-101 (for corrective action) 53-31-00-991-030 Fig. 621

 3. Job Set-up
__________ Subtask 53-31-00-010-082
 A. Get Access WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______
 BEFORE YOU START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 (1)
 Install the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000) on the slat/flap control lever when working near the slats/flaps.

 (2)
 Put the warning notice on the slat/flap control lever to tell persons not to operate the slats.

 (3)
 Put the adjustable access platform in position.

 (4)
 Remove the wing-to-fuselage fairings (Ref. TASK 53-35-11-000-001):

 -191BT from the left side,
 -192BT from the right side.

 (5)
 Remove the quick-release access panels (Ref. TASK 53-35-13-000-002):

 -191EB from the left side,
 -192EB from the right side. Subtask 53-31-00-110-076
 B. Cleaning Procedure WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.

 WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
 (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint free cloth , if necessary. Make sure the area is dry before you continue.
 4. Procedure
_________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 53-31-00-210-073
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身2(66)