____
the correct repair procedure.
5. Close-up
________ Subtask 53-31-00-916-061
A. Apply STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspection area (Ref. TASK 51-75-13-916-002).
Subtask 53-31-00-410-063
B. Close Access
(1)
Close the MLG doors (Ref. TASK 32-12-00-410-001).
(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-31-00Page 665
May 01/04
R
CES
MLG Door Hinge Fittings and Actuator Fitting on the Keelbeam Box Figure 613/TASK 53-31-00-991-015
EFF : ALL
53-31-00Page 666
May 01/04 R CES
TASK 53-31-00-210-015
Detailed Visual Inspection of Lower Skin of Longitudinal Lap Joints in Crack Stopper Areas, at Stringer 6, LH/RH, External Surface
1. Reason for the Job
__________________
Refer to the MPD TASK: 533126-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint-free cloth
No specific adjustable access platform 5 m (16 ft. 5 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-002 USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
ASRM 53-31-11-101 (for corrective action) 53-31-00-991-016 Fig. 614
EFF : ALL
53-31-00Page 667
May 01/04
R
CES 3. Job Set-up
__________
Subtask 53-31-00-010-071
A. Get Access
(1)
Put the adjustable access platform in position.
(2)
Clean the inspection area with CLEANING AGENTS (Material No. 11-002) and a lint-free cloth.
4. Procedure
_________
(Ref. Fig. 614/TASK 53-31-00-991-016) R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 53-31-00-210-064
A. Inspection
(1) Examine the lower skin of the longitudinal lap joints in the crack stopper area between FR35 thru FR47, LH/RH external surface, for cracks.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-31-11-101) for
____
the correct repair procedure.
**ON A/C 301-399,
Subtask 53-31-00-210-064-A
A. Inspection
(1) Examine the lower skin of the longitudinal lap joints in the crack stopper area between FR35.8 thru FR47, LH/RH external surface, for cracks.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-31-11-101) for
____
the correct repair procedure.
EFF : ALL
53-31-00Page 668
Lap Joint FR35 thru FR47 Figure 614/TASK 53-31-00-991-016
R EFF : ALL 53-31-00 Page 669 May 01/04
CES
R **ON A/C ALL
5. Close-up
________
Subtask 53-31-00-410-069
A. Close Access
(1)
Remove the access platform(s).
(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-31-00Page 670
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
TASK 53-31-00-210-016
Detailed Visual Inspection of the Emergency Exit Skin Cutouts, Upper and Lower Corners, LH/RH
1. Reason for the Job
__________________
Refer to the MPD TASK: 533128-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身2(61)
