TASK 53-21-00-220-003
Detailed Inspection of Fuselage Surface Covered by Belly Fairing, between FR
35.5 and FR 35.7 from Stringer 26 to Stringer 32, LH/RH
1. Reason for the Job
__________________
Refer to the MPD TASK: 532168-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 2.5 m (8 ft. 2 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
53-25-11-000-001 Removal of the Wing-to-Fuselage Fairings (191AT, 191AB, 192AT, 192AB) 53-25-11-400-001 Installation of the Wing-to-Fuselage Fairings (191AT,
191AB, 192AT, 192AB) SRM 511100 P.Block 001 (for corrective action) SRM 512200 P.Block 001 (for corrective action) 53-21-00-991-034 Fig. 632
EFF : 301-399, 53-21-00Page A675
May 01/05
R
CES
3. Job Set-up
__________
Subtask 53-21-00-010-078
A. Get Access
(1)
Put an access platform in position at the zone 191 (192).
(2)
Remove the access panels 191AT (192AT) (Ref. TASK 53-25-11-000-001).
Subtask 53-21-00-110-081
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
(1) Clean the inspection area with a CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure
_________
Subtask 53-21-00-220-074
A. Inspection
(Ref. Fig. 632/TASK 53-21-00-991-034)
(1) Do a detailed inspection of the fuselage surface below the belly fairing, from FR35.5 to FR35.7. This inspection is applicable from STGR26 to STGR32, left and right sides.
EFF : 301-399, 53-21-00Page A676
May 01/05
R
CES
Fuselage Surface Below the Belly Fairing, from FR35.5 to FR35.7 Figure 632/TASK 53-21-00-991-034
EFF : 301-399, 53-21-00Page A677 May 01/05 R CES
(2) Make sure that there is no:
(a)
Corrosion damage:
-If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion , inspection, removal and corrosion protection.
(b)
Other damage (cracks, scratches, stress, marks, dents, bumps,...):
-If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up
________
Subtask 53-21-00-410-076
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the access panels 191AT (192AT) (Ref. TASK 53-25-11-400-001).
(3)
Remove the access platform(s).
EFF : 301-399, 53-21-00Page A678
May 01/05
R
CES TASK 53-21-00-220-004
Detailed Inspection of Forward Emergency Exit Skin Cutout, Upper Corners, External Surface, RH
1. Reason for the Job
__________________
Refer to the MPD TASK: 532151-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.2 m (10 ft. 6 in.)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身2(21)
