(2)
Put an access platform in position below the cargo door
(3)
If installed, remove the rear additional center tank (Ref. AMM 28-11-27, Page Block 401).
(4)
Remove the lower sidewall panels 252NW, 252RW and 252UW of the passenger compartment (Ref. TASK 25-23-44-000-001).
(5)
Remove the insulation blankets (Ref. TASK 25-80-00-000-001).
NOTE : Identify the insulation blankets for installation.
____
(6) Cleaning.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(a) Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
EFF : ALL
53-41-00Page 617
**ON A/C ALL
4. Procedure
_________
(Ref. Fig. 604/TASK 53-41-00-991-006)
Subtask 53-41-00-210-059
A. Inspection
(1) Examine the fuselage structure at the internal attachment of the hinge fitting at the AFT cargo-compartment door for:
-corrosion,
-cracks.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-001) for
____
the correct repair procedure.
5. Close-up
________ R **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 53-41-00-410-075
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the insulation blankets (Ref. TASK 25-80-00-400-001).
(3)
Install the lower sidewall panels 252GW, 252KW and 252NW of the passenger compartment (Ref. TASK 25-23-44-400-001).
(4)
If removed, install the rear additional center tank (Ref. AMM 28-11-27, Page Block 401).
(5)
Remove the access platform(s).
(6)
Close the aft cargo compartment door (Ref. TASK 52-30-00-860-002).
(7)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-41-00Page 618
Fuselage Structure at the Internal Attachment of the Hinge Fittings at the AFT
Cargo-Compartment Door
Figure 604/TASK 53-41-00-991-006
EFF : ALL
53-41-00Page 619
Feb 01/00 R CES
R **ON A/C 151-199, 401-499,
Subtask 53-41-00-410-075-A
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the insulation blankets (Ref. TASK 25-80-00-400-001).
(3)
Install the lower sidewall panels 252NW, 252RW and 252UW of the passenger compartment (Ref. TASK 25-23-44-400-001).
(4)
If removed, install the rear additional center tank (Ref. AMM 28-11-27, Page Block 401).
(5)
Remove the access platform(s).
(6)
Close the aft cargo compartment door (Ref. TASK 52-30-00-860-002).
(7)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
**ON A/C ALL
TASK 53-41-00-210-006
Detailed Visual Inspection of Fuselage AFT Cargo Door Hinge Fittings and
External Attachment Area
1. Reason for the Job
__________________
Refer to the MPD TASK: 534153-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific lint-free cloth
No specific access platform 3 m (9 ft. 10 in.)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身2(139)
