(1) Do a detailed visual inspection of the external fuselage skin between FR35 and FR36, and between stringer 25 and stringer 30 LH and RH, for cracks.
NOTE : If required, for information on allowable damage and repair
____ procedures for cracks, refer to the ASRM's:
-skin plates, allowable damage (Ref. ASRM 53-31-11-101) and repairs (Ref. ASRM 53-00-11-201).
EFF : ALL
53-31-00Page 697
External Surface of Fuselage Skin between FR35 and FR36, and between Stringer 25 and Stringer 30, LH/RH Figure 621/TASK 53-31-00-991-030
CES EFF : ALL
R **ON A/C 301-399,
R Subtask 53-31-00-210-073-A
R R A. Detailed Visual Inspection Procedure (Ref. Fig. 621/TASK 53-31-00-991-030)
R R R (1) Do a detailed visual inspection of the external fuselage skin between FR35.8 and FR36, and between stringer 25 and stringer 30 LH and RH, for cracks.
R R R R R NOTE : If required, for information on allowable damage and repair____ procedures for cracks, refer to the ASRM's: - skin plates, allowable damage (Ref. ASRM 53-31-11-101) and repairs (Ref. ASRM 53-00-11-201).
R **ON A/C ALL
5. Close-up________
Subtask 53-31-00-410-080
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Install the quick-release access panels (Ref. TASK 53-35-13-400-002): - 191EB on the left side, - 192EB on the right side.
(3) Install the wing-to-fuselage fairings (Ref. TASK 53-35-11-400-001): - 191BT on the left side, - 192BT on the right side.
(4) Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000) from the flap/slat control lever.
(5) Remove the warning notice(s).
(6) Remove the access platform(s).
(7) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
53-31-00Page 699
May 01/04
R **ON A/C 001-049, 051-099, 101-105, 151-156, 201-208,
TASK 53-31-00-210-026
Detailed Visual Inspection of Riveted Area of Keel Beam Side Panel at
Attachment to Center Wing Box, LH/RH
1.
Reason for the Job
__________________
Refer to the MPD TASK: 533142-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific lint free cloth R No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE R No specific 1 WARNING NOTICE
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
R EFF : 001-049, 051-099, 101-105, 151-156, 53-31-00Page A600 201-208, May 01/05
CES
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-12-00-010-001 32-12-00-410-001 53-35-13-000-002 53-35-13-400-002 ASRM 53-31-29-201 53-31-00-991-031 Open the Main Gear Doors for AccessClose the Main Gear Doors after AccessRemoval of the Quick-Release Access Panels from the Belly Fairing StructureInstallation of the Quick-Release Access Panels on the Belly Fairing Structure(for corrective action)Fig. 622
3. Job Set-up__________
Subtask 53-31-00-010-085
A. Get Access
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION_______ BEFORE YOU START A TASK ON OR NEAR: - THE FLIGHT CONTROLS - THE FLIGHT CONTROL SURFACES - THE LANDING GEAR AND THE RELATED DOORS - COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE_______ LANDING GEAR.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR ARE CLEAR._______
(1) Open the MLG doors (Ref. TASK 32-12-00-010-001).
R (2) Put the WARNING NOTICE in position to tell persons not to operate the landing gear.
R R (3) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below the MLG compartment.
R (4) Remove the access panels 191KB, 192KB, 195AB, 196AB (Ref. TASK 53-35-13-000-002).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身2(67)
