1EFF : ALL 1 52-42-18Page 401 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
3. Job Set-up
__________
Subtask 52-42-18-010-050
A. Get Access
(1) Put an access platform in position at the zone 192.
(2) Open the door 192MB.
Subtask 52-42-18-865-050
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU FUEL/RFL/DFL/SPLY 2QU L24 122VU ELEC/RFL/SPLY/LOGIC 4PR U29
4. Procedure
_________
**ON A/C 001-001, 051-052,
(Ref. Fig. 401/TASK 52-42-18-991-001) R **ON A/C 106-149, 219-299, 301-399, 401-499,
(Ref. Fig. 401A/TASK 52-42-18-991-001-B)
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-218,
Post SB 53-1136 For A/C 001-001,051-052,
(Ref. Fig. 401B/TASK 52-42-18-991-001-A)
1EFF : ALL 1 52-42-18Page 402 1 1 Aug 01/05 1 1 1CES 1
Fuel Panel Access-Door
Figure 401/TASK 52-42-18-991-001
R 1EFF : 001-001, 051-052, 1 52-42-18Page 403 1 1 May 01/05 1 1 1CES 1
Fuel Panel Access-Door
Figure 401A/TASK 52-42-18-991-001-B
R 1EFF : 106-149, 219-299, 301-399, 401-499, 1 52-42-18Page 404 1 1 Aug 01/05 1 1 1CES 1
Fuel Panel Access-Door
Figure 401B/TASK 52-42-18-991-001-A
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 52-42-18Page 405 1201-218, 1May 01/05 1 1 1CES 1 **ON A/C 001-001, 051-052,
Subtask 52-42-18-020-051
A. Removal of the Door 192MB
(1)
Disengage the spring (9) from the door frame fitting (1).
(2)
Hold the door (8).
(3)
Remove the nuts (2) and the bolts (2) and (16), the washers (15) and the cup washers (13).
(4)
Keep the spring fitting (11).
(5) Remove the door (8). R **ON A/C 106-149, 219-299, 301-399, 401-499,
Subtask 52-42-18-020-051-B
A. Removal of the Door 192MB
(1)
Open the door (4).
(2)
Remove and discard the nut (12) and the washer (10) and disconnect the bonding lead (11).
(3)
Remove the nut (1), the spacer (2) and the screw (3).
(4)
Remove and discard the nuts (6), the washers (7) and the screws (9).
(5)
Remove the door (4).
(6)
Disassembly of the door (4):
(a)
Remove and discard the cotter pin (15), the washers (14), the pin (17), the axis (16) and the spring (13).
(b)
Remove the lockwire from the nuts (18) and (20).
(c)
Remove the nut (18), the washers (19), the locknut (20) and the stop contactor (21).
R 1EFF : 001-001, 051-052, 106-149, 219-299, 1 52-42-18Page 406 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-218, R Post SB 53-1136 For A/C 001-001,051-052,
Subtask 52-42-18-020-051-A
A. Removal of the Door 192MB
(1)
Open the door (10).
(2)
Remove the nut (15) and the washer (16), (7), (6) and (5) and the screw (4).
(3)
Disengage the spring (3).
(4)
Hold the door (10).
(5)
Remove the nuts (8) the screws (1) and (18), the washers (17) and the cup washers (2).
(6)
Remove the door (10).
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 52-42-18Page 407 1201-218, 1May 01/05 1 1 1CES 1
**ON A/C ALL
TASK 52-42-18-400-001
Installation of the Fuel Panel Access-Door 192MB
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R R R -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R No specific dynamometer 20 m.daN
R B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门7(9)
