(1)
Remove the high-speed tape from the cutout of the fuselage.
(2)
Cut and remove the tie-wrap from the temporarily attached connector.
(3)
Remove the blanking caps from the electrical connectors.
(4)
Connect the electrical connector (2) to the microswitch 44MG (1).
(5)
Install the replacement AFT service door on the fuselage (Ref. TASK 52-42-11-400-001).
5. Close-up
________ Subtask 52-42-00-410-052
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Make sure that the AFT service door 172AR is closed.
1EFF : ALL 1 52-42-00Page 418 1 1 May 01/05 1 1 1CES 1
(3) Remove the access platform(s).
R **ON A/C 001-049, 051-099, 101-105,
Subtask 52-42-00-865-057-A
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s): -------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION -------------------------------------------------------------------------------2001VU VACUUM TOILET SYSTEM/LAVATORY POWER 32MG A01 2001VU VACUUM TOILET SYSTEM/LAVATORY POWER 45MG A02 2001VU VACUUM TOILET SYSTEM/LAVATORY POWER 39MG A03 2001VU VACUUM TOILET SYSTEM/LAVATORY POWER 34MG A04 2001VU VACUUM TOILET SYSTEM/VACUUM SYS 35MG A06 2001VU VACUUM TOILET SYSTEM/VACUUM GEN 33MG A08
R **ON A/C 106-149, 151-199, 201-299,
Subtask 52-42-00-865-057-B
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit
breaker(s): -------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION -------------------------------------------------------------------------------2001VU VACUUM TOILET SYSTEM/LAVATORY POWER A 32MG A01 2001VU VACUUM TOILET SYSTEM/LAVATORY POWER 45MG A02 2001VU VACUUM TOILET SYSTEM/LAVATORY POWER D 39MG A03 2001VU VACUUM TOILET SYSTEM/LAVATORY POWER E 34MG A04 2001VU VACUUM TOILET SYSTEM/VACUUM SYS 35MG A06 2001VU VACUUM TOILET SYSTEM/VACUUM GEN 33MG A08
1EFF : ALL 1 52-42-00Page 419 1 1 May 01/05 1 1 1CES 1
DOOR - LAVATORY SERVICE, AFT - REMOVAL/INSTALLATION
___________________________________________________ TASK 52-42-11-000-001 Removal of the Service Door 172AR
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.0 m (3 ft. 3 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-42-11-991-001 Fig. 401
3. Job Set-up
__________ Subtask 52-42-11-941-050
A. Position Ground Equipment
(1) Put the access platform in position at zone 172. Subtask 52-42-11-010-050
B. Access
(1) Open the aft lavatory service door 172AR.
1EFF : ALL 1 52-42-11Page 401 1 1 Feb 01/98 1 1 1CES 1
4. Procedure
_________
(Ref. Fig. 401/TASK 52-42-11-991-001) Subtask 52-42-11-020-051
A. Remove Service Door
(1)
Remove the screws (2) and the springs (3).
(2)
Remove the service door 172AR (1).
1EFF : ALL 1 52-42-11Page 402 1 1 Feb 01/98 1 1 1CES 1
Service Door 172AR
Figure 401/TASK 52-42-11-991-001
1EFF : ALL 1 52-42-11 Page 403
1 1 Feb 01/98
1 1
1CES 1
TASK 52-42-11-400-001 Installation of the Service Door 172AR
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-42-11-991-001 Fig. 401
3. Job Set-up
__________ Subtask 52-42-11-860-050
A. Aircraft Maintenance Configuration
(1) Make sure that the access platform is in position at zone 172.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门7(2)
