77-41-00
AMM
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
% % % Figure 1: Engine Instruments %
77-41-00
Engine Indicating
AMM
% The Auxiliary Engine Display (AED; Figure 1, bottom) gives the following indications:
%) Water Level (Coolant). This is a low coolant level caution light (color: amber).
%) Fuel Quantity Main. This is a circular analog display from 0 to 14 gal.
%) Fuel Quantity Aux. This is a circular analog display from 0 to 14 gal.
%) Fuel Temp Main. This is a linear analog display from -30 oC to 65 oC.
%) Fuel Temp Aux. This is a linear analog display from -30 oC to 65 oC.
%) Generator. This is a linear analog display from 0 to 90 ampères.
%) Volts. This is a linear analog display from 11 to 15.5 volts.
%) Fuel Flow. This is a 4-character digital display.
%) Both digital and analog displays use groups of light-emitting diodes (LEDs).
%
% A. Digital Displays
% The RPM, load and fuel flow displays use the usual 7-segment LEDs.
% B. Fuel Quantity Analog Displays
% Each fuel quantity analog display has a group of 32 LEDs arranged in an arc. All but one of the
% LEDs are green. The LED adjacent to the zero mark is red.
% C. Linear Analog Displays % All of the linear analog displays use similar groups of 10 LEDs set in a horizontal line. Displays % showing pressure, temperature, current and voltage use combinations of red, yellow and green % LEDs. The colors have the usual meanings for instrument markings.
Doc # 6.02.01 Page 3
Rev. 4 09 Jan 2003
77-41-00
AMM
% Intentionally left blank
77-41-00
Engine Indicating
AMM
% Trouble-Shooting % 1. General
% The table below lists the defects you could have with the engine-indication system. For more data on % the system refer to the equipment manufacturer’s manual.
% If you have the trouble detailed in the Trouble column read across to the Possible Cause column.
% Then do the repair given in the Repair column. % %
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
Trouble Possible Cause Repair
No indication on the engine indicators with the engine operating or with the ELECTRIC MASTER key switch set to ON. INST 1 Circuit-breaker not set. Make sure that the circuit-breaker for the engine instruments is set.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:钻石40飞机维护手册 DA 40 SERIES AMM 6(8)