(6)
Open the fan cowl panel (AMM 71-11-04/201).
S 214-006-N00
(7)
Make sure the deactivation pins are not installed in the thrust reverser sleeve (AMM 78-31-00/201).
E.
Remove the thrust reverser sleeve (Fig. 401 and 402)
S 014-029-N00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-31-10
ALL ú ú N01 Page 402 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 014-008-N00
CAUTION:_______ DO NOT MOVE THE THRUST REVERSER WHILE THE THRUST REVERSER OR
CORE COWL PANEL IS OPEN. IF THE THRUST REVERSER OR CORE COWL
PANEL IS OPEN, DAMAGE TO THE THRUST REVERSER AND CORE COWL
PANEL CAN OCCUR.
(1)
Remove the core cowl panels (AMM 71-11-06/201).
S 494-009-N00
(2)
Attach the sling to the thrust reverser sleeve (Fig. 402).
(a) Remove the four screw plugs from the thrust reverser sleeve.
NOTE: The plugs are installed forward of the top and middle
____ access panels for the hydraulic actuator.
(b) Install the fittings on the thrust reverser sleeve at the applicable position with the mark. 1) Make sure you know the fitting names for the sling attach
points to correctly install the sling. 2) All four fittings have a mark.
S 984-010-N00
CAUTION: REMOVE ALL EQUIPMENT, WORK STANDS, AND OTHER ITEMS WHICH ARE IN
_______ THE AREA TO THE REAR OF THE THRUST REVERSER. IF YOU DO NOT DO THIS, YOU CAN CAUSE DAMAGE TO THE THRUST REVERSER.
(3)
Manually extend the thrust reverser (AMM 78-31-00/201).
S 014-011-N00
(4)
Remove the access panels for the hydraulic actuator from the thrust reverser.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-31-10
ALL ú ú N01 Page 403 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
UPPER TRACK
NON-LOCKING FAIRINGS
HYDRAULIC
ACTUATOR
BLOCKER PLUG
DOOR (6 LOCATIONS)
SEE A
SEE B
DRAG LINK
HYDRAULIC ACTUATOR REVERSER THRUST SLEEVE (6 LOCATIONS) (6 LOCATIONS) BOLT (6 LOCATIONS) WASHER BUSHING NON-LOCKING ACTUATOR HYDRAULIC (2 LOCATIONS) PLUG THRUST REVERSER SLEEVE LOCKING HYDRAULIC ACTUATOR
(6 LOCATIONS) ACCESS PANEL A
(6 LOCATIONS) WASHER (6 LOCATIONS) NUT AND COTTER PIN (30 LOCATIONS) SCREW
B
Figure 401 Thrust Reverser Sleeve Installation
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-31-10
ALL ú ú N01 Page 404 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
TOP ACCESS PANEL
HOIST
SLING
THE POINT TO ATTACH THE SLING (4 LOCATIONS)
MIDDLE ACCESS PANEL
THRUST REVERSER SLEEVE
FWD
HOLD-OPEN ROD
NOTE: OPEN THE THRUST REVERSER SLEEVE____ MORE THAN 23 DEGREES. OPEN THE THRUST REVERSER SLEEVE TO THE 23 DEGREE POSITION. DO NOT
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 EXHAUST 1(110)