C.
E0470
(1) P/N Identification
E0470 A 01 R | | | | | | | ------ Provisioning code : R = SIX system | | | no code = TMS90 system | | ---------- Size code | ------------- Color code : A = White | P = Pink ------------------ Standard P/N
20-42-33 Page 3
(2)
Characteristics
(a) Temperature
-Minimum operating temperature is -40 deg.C (-40.00 deg.F).
-Maximum operating temperature is 125 deg.C (257.00 deg.F).
(3)
Marking
(a) For E0470 XXX, use TMS90 system:
-
In non pressurized areas, you must do 1 print and 2 permatisings.
-
In skydrol areas, you must do 3 prints and 2 permatisings.
(4)
For E0470 XXXR, use SIX system (with LEXMARK 2390 printer):
-After printing, you must do 1 permatising.
-Make sure that the printing is resistant and that you can read it.
(5)
Installation Refer to paragraph: Marking procedure.
D. E0683 ____
NOTE : This label is used only in non skydrol areas.
(1) P/N Identification
E0683 ML 1 Y
| | | |
| | | ------------- Color code : W = White
| | | Y = Yellow
| | ---------------- Thickness code
| -------------------- Type code
------------------------- Standard P/N
(2)
Characteristics
(a) Temperature
-Minimum operating temperature is -55 deg.C (-67.00 deg.F).
-Maximum operating temperature is 135 deg.C (275.00 deg.F).
(3)
Marking For marking, use typewriter.
(4)
Installation
-Wind the label around the harness and shrink at 130 deg.C (266.00 deg.F).
20-42-33 Page 4
E. NSA931025
(1) P/N Identification
NSA931025 - 01 A
| | |
| | ---------------- Size code
| -------------------- Material code ------------------------------ Standard P/N
(2)
Characteristics
(a) Temperature
-Minimum operating temperature is -55 deg.C (-67.00 deg.F).
-Maximum operating temperature is 120 deg.C (248.00 deg.F).
(3)
Marking Refer to paragraph: Marking procedure.
(a)
For NSA931025-01 and -02, use DYNAMARK system.
(b)
For NSA931025-03, -04 and -05, use FOTOFOIL system.
