20-33-45 Page 2220-33-45 Page 23
R (b) For ABS0327 and ABS0581
R -------------------------------------------------
R | CONDUIT | ADAPTOR SIZE CODE | CONDUIT |
R | SIZE |-------------------------| TYPE |
R | CODE | ABS0327 | ABS0581 | CODE |
R |---------|------------|------------|-----------|
R | 06 | 08, 10 | 08, 10, 12 | |
R |---------|-------------------------| |
R | 09 | 08, 10, 12, 14 | |
R |---------|-------------------------| |
R | 10 | 12, 14 | |
R |---------|-------------------------| |
R | 12 | 14, 16, 18,| 12, 14, 16 | A, B, V |
R | | 20, 22 | 18, 20, 22 | and W* |
R |---------|------------|------------| |
R | 14 | 18, 20 | 18, 20, 22 | |
R |---------|------------------------ | |
R | 20 | 18, 20, 22, 24 | |
R |---------|-------------------------| |
R | 32 | -| 24 | |
R -------------------------------------------------
R * For ABS0327 only
R (3) Conduit Type Code
R (a) For ABS0327 and ABS0581
R ---------------------------------------------------------
R | CONDUIT TYPE CODE | |
R |---------------------------| CONDUIT P/N |
R | FOR ADAPTOR | FOR CRIMP | |
R | | SLEEVE | |
R |-------------|-------------|---------------------------|
R | A | A | E0432 and NSA935805 |
R |-------------|-------------|---------------------------|
R | B | B | NSA935805T |
R |-------------|-------------|---------------------------|
R | | V | ABS0330 |
R | V |-------------|---------------------------|
R | | VW | ABS0330, ABS0510, ABS0511 |
R |-------------|-------------|---------------------------|
R | W* | W | ABS0492 |
R ---------------------------------------------------------
R * For ABS0327 only
C. Installation procedure
R Refer to chapter: Metallic conduit - 20-33-32.
20-33-45 Page 2420-33-45 Page 25
R ____________________________________________6. End Piece and Conduit Fitting at Conduit End
This type of end piece and conduit fitting has for example the codes that
follow:
- ABS0513
- ABS0519
ABS0582
ABS0584 (ex ABS0334)
R ABS1023
A. ABS0513
(Ref. Fig. 013)
For shielded conduits fastened directly on the structure by a screw nut
device, only the locking nut is secured by lockwire.
(1) P/N identification
ABS0513 -06 C
| | |
| | ------------------- Material code : C = stainless steel
| | No code = aluminum
| |
R | ------------------------ Size code
|
|
-------------------------------- Standard P/N
(2) P/N characteristics
(a) Temperature
Minimum operating temperature is -55 deg.C (-67.00 deg.F)
(stainless steel and aluminum)
Maximum operating temperature is 250 deg.C (482.00 deg.F)
(stainless steel)
Maximum operating temperature is 100 deg.C (212.00 deg.F)
(aluminum)
R (b) Size code
R (Ref. Fig. 013)
R ----------------------------------------------------------------------------
R | SIZE CODE | 06 | 09 | 10 | 12 | 14 | 16 | 20 | 24 | 32 | 40 |
R |--------------|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
R | DIAMETER "A" | | | | | | | | | | |
R | (mm) | 9,90|11,50| 13 |14,60|16,20|17,80| 21 |24,10|30,50|36,80|
R |--------------|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
R | LENGTH "B" | | | | | | | | | | |
R | (mm) | 4,50| 6,50| 7,50| 8,50| 9,50| 10 |13,50|15,50|20,50|25,50|
R ----------------------------------------------------------------------------
R Backshell, End Piece and Conduit Fitting - P/N Characteristics and Installation R ABS0513 and ABS0519
Figure 013
20-33-45 Page 26
(3) Installation procedure
-
Install the backshell on the wires before you connect them to the connector.
-
Install the nut, tighten and safety.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 ESPM Electrical Standard Practices Manual 2(85)
