20-42-31 Page 11
Identification Sleeves - Allocation Table for Wires
NSA937201
Figure 010
20-42-31 Page 12
Identification Sleeves - Allocation Table for Wires
NSA937201
Figure 011
20-42-31 Page 13
Identification Sleeves - Allocation Table for Wires
NSA937201
Figure 012
20-42-31 Page 14
NSA937202 MC 01 00
| | | |
| | | ------------- Procurement code
| | |
| | ----------------- Inner diameter code
| |
| --------------------- Type code
|
----------------------------- Standard P/N
(2)
Characteristics
(a)
Color The sleeve color is yellow.
(b)
Diameter code (Ref. Fig. 001)
(3)
Allocation table (Ref. Fig. 013)
D. NSA937203
(1)
P/N Identification
NSA937203 - 01 - 5 | | | | | ---------------- Number marked on sleeve (0 to 9) | | | --------------------- Type code | ----------------------------- Standard P/N
(2)
Characteristics
(a)
Color The sleeve color is yellow.
(b)
Diameter code (Ref. Fig. 001)
(c)
Marking Numbers 6 and 9 are underlined to prevent confusion.
20-42-31 Page 15
Identification Sleeves - Allocation Table for Wires
NSA937202
Figure 013
20-42-31 Page 16
___________________________________________________
LABELS - IDENTIFICATION - DESCRIPTION AND OPERATION
_______
1. General
Identification labels installed on aircraft have the codes that follow:
ABS1475 label
E0248 label (4 to 6 holes)
NSA931029 label
__________________________________
2. Identification and characteristics
A. ABS1475
This type of label is used in skydrol areas.
(1)
P/N Identification
(Ref. Fig. 001)
ABS1475 - 01 | | | --------- Writing code | ---------------- Standard P/N
(2)
Characteristics
(a) Temperature
-Minimum operating temperature is -55 deg.C (-67.00 deg.F).
-Maximum operating temperature is 70 deg.C (158.00 deg.F).
(b) Writing code -------------------------------------------------------------------------------| writing | | writing | background | | code | wording | color | color | |---------|------------------------------------|--------------|---------------| | | first | | | | | | line | CAUTION | | | | 01 |--------|---------------------------| red | white | | | second | | | | | | line | FUEL TANK HARNESS ONLY | | | -------------------------------------------------------------------------------
(3)
Marking
This type of label is supplied printed.
(4)
Installation
The installation is the same as E0248.
Refer to chapter 20-32-51.
20-42-32 Page 1
Labels - P/N Characteristics
ABS1475
Figure 001
20-42-32 Page 2
B. E0248
(1) P/N Identification
(Ref. Fig. 002) E0248 A 2 - 4H 9 P R
| | | | | | |
| | | | | | --- Provisioning code : No code = TMS90 system
| | | | | | R = SIX system
| | | | | ------ Color code : P = Pre-cut label
| | | | | no code = Label without precutting
| | | | --------- Color code
| | | ------------- Holes number code (4 to 6)
| | ----------------- Size code
| -------------------- Material code
------------------------- Standard P/N
(2)
Characteristics
(a)
Temperature (Ref. Fig. 002)
(b)
Color code (Ref. Fig. 002)
(c)
Material code (Ref. Fig. 002)
(3)
Marking
(a) For E0248 XX-XXXX use TMS90 system:
-
In non SKYDROL areas, you must do 1 print and 2 permatisings.
-
In SKYDROL areas, you must do 3 prints and 2 permatisings.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 ESPM Electrical Standard Practices Manual 2(96)
