(4)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(5)
Remove the access platform(s). Subtask 49-12-00-865-065
B.
Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1KD, 2KD.
Subtask 49-12-00-860-063
C. Aircraft Maintenance Configuration
(1)
Pressurize the reservoirs of the hydraulic systems.
(Ref. TASK 29-14-00-614-002).
(2)
De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
(3)
Remove the warning notice(s).
R EFF : 001-049, 101-105, 107-107, 151-199, 49-12-00Page 611 201-210, Config-2 Aug 01/05
CES
APU MOUNTS ((APS 3200)) - INSPECTION/CHECK
__________________________________________ TASK 49-12-00-210-004 Detailed Visual Inspection of APU Suspension Rods, Shockmounts Structure
including Brackets and Visible Part of Attachment Fittings (APS 3200) WARNING : DO NOT TOUCH THE APU UNTIL IT IS SUFFICIENTLY COOL TO PREVENT BURNS
_______ WHEN YOU DO THE MAINTENANCE TASK(S).
1.
Reason for the Job
__________________
Refer to the MPD TASK: 491200-A1
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific caliper gauge No specific circuit breaker(s) safety clip(s) No specific lint free cloth No specific source of white light No specific stiff bristle brush No specific straight-edge No specific access platform 2.5 m (8 ft. 2 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-001 USA MIL-D-16791 TYPE I DETERGENT (Ref. 20-31-00) C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 24-41-00-862-002 29-10-00-864-001 29-10-00-864-002 29-10-00-864-003 49-12-51-000-002 49-12-51-400-002 49-12-52-000-002 49-12-52-400-002 49-12-53-000-002 49-12-53-400-002 49-12-54-000-002 49-12-54-400-002 52-41-00-010-001 52-41-00-410-001 49-12-00-991-004
3. Job Set-up
__________ Subtask 49-12-00-860-056
Energize the Aircraft Electrical Circuits from the External PowerDe-energize the Aircraft Electrical Circuits Supplied from the External PowerDepressurize the Green Hydraulic SystemDepressurize the Yellow Hydraulic SystemDepressurize the Blue Hydraulic SystemRemoval of the FWD LH Tie-Rods and Vibration Isolator 4035KM (APS 3200)Installation of the FWD LH Tie-Rods and Vibration Isolator 4035KM (APS 3200)Removal of the FWD RH Tie-Rods and Vibration Isolator 4045KM (APS 3200)Installation of the FWD RH Tie-Rods and Vibration Isolator 4045KM (APS 3200)Removal of the AFT Tie-Rod and Vibration Isolator 4055KM (APS 3200)Installation of the AFT Tie-Rod and Vibration Isolator (APS 3200)Removal of the APU Mount Brackets 4065KM, 4075KM, 4085KM (APS 3200)Installation of the APU Mount Brackets 4065KM, 4975KM, 4085KM (APS 3200)Open the APU Doors for AccessClose the APU Doors after AccessFig. 601
A. Aircraft Maintenance Configuration.
(1)
Put the warning notices on panel 25VU to tell persons not to start the APU.
(2)
Energize the ground service network (Ref. TASK 24-41-00-861-002).
(3)
Make sure that the hydraulic systems are depressurized (Ref. TASK 29-10-00-864-001), (Ref. TASK 29-10-00-864-002) and (Ref. TASK 29-10-00-864-003).
Subtask 49-12-00-865-058
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU APU/APU/CTL 2KD L42 121VU APU/ECB/SPLY 1KD L41
Subtask 49-12-00-010-054
C. Get Access
(1)
Put the access platform in position below the APU access doors 315AL and 316AR.
(2)
Open the APU access doors 315AL, 316AR and safety them in the open position (Ref. TASK 52-41-00-010-001).
(3)
Set the LIGHT control switch 11LJ to the ON position.
4. Procedure
_________ (Ref. Fig. 601/TASK 49-12-00-991-004) Subtask 49-12-00-110-053
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 机载辅助动力 AIRBORNE AUXILIARY POWER2(75)
