(7)
Loosen the pipe end-fitting (26) and disconnect the pipe (25) from
the union (27).
(8)
Loosen the pipe end-fitting (2) and disconnect the tee connector (1) from the union (3).
(9)
Hold the manifold (17) and remove the five bolts (19) and the washers (20). Collect the five distance pieces (21) from between the manifold
(17) and the structure.
(10)
Remove the manifold (17).
(11)
Put blanking plugs on the disconnected line ends and the manifold ports.
R 1EFF : 059-099, 102-149, 151-199, 201-299, 1 29-13-14Page 407 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
**ON A/C ALL
TASK 29-13-14-400-001
Installation of the HP Manifold of the Yellow Hydraulic System
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking plugs No specific container No specific warning notices No specific 1 BAG - PLASTIC No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 1.00 to 10.00 m.daN
(8.00
to 75.00 lbf.ft) No specific Torque Wrench : range 2.00 to 20.00 m.daN
(15.00 to 150.00 lbf.ft)
B.
Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 02-003 F NSA 307110 TYPE 4 HYDRAULIC FLUID (PHOSPHATE ESTER BASE) (Ref. 20-31-00)
Material No. 09-013 USA MIL-PRF-81733 TYPE I CLASS A CORROSION INHIBITING BRUSH CONSISTENCY (Ref. 20-31-00)
Material No. 16-003 F ASNB70720 COATING (OBSOLETE USE 16-021) (Ref. 20-31-00)
1EFF : ALL 1 29-13-14Page 408 1 1 May 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-010 USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
(Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
7 back-up ring 29-13-14 02A-230
9 O-rings 29-13-14 02A-270
15 square-section seals 29-13-14 02 -130
15 square-section seals 29-13-14 02A-170
24 packing 29-13-14 02 -040
24 O-ring 29-13-14 02A-080
32 O-ring 29-13-14 02 -040
33 back-up rings 29-13-14 20 -010
33 back-up rings 29-13-14 20A-010
34 O-ring 29-13-14 20 -020
34 O-ring 29-13-14 20A-020
38 backup-rings 29-13-14 02 -120
38 backup-rings 29-13-14 02A-160
40 square-section seals 29-13-14 02 -130
40 square-section seals 29-13-14 02A-170
50 square-section seals 29-13-14 02A-300
51 square-section seal 29-13-14 02A-250
52 back-up ring 29-13-14 02A-240
53 O-ring 29-13-14 02A-220
54 back-up rings 29-13-14 02 -120
54 back-up rings 29-13-14 02A-160
55 back-up rings 29-13-14 02 -110
55 back-up rings 29-13-14 02A-150
56 packings 29-13-14 02 -100
56 O-rings 29-13-14 02A-140
57 packings 29-13-14 02 -100
57 O-rings 29-13-14 02A-140
58 backup-rings 29-13-14 02 -110
58 backup-rings 29-13-14 02A-150
59 back-up rings 29-13-14 02A-280
60 back-up rings 29-13-14 02A-290
1EFF : ALL 1 29-13-14Page 409 1 1 May 01/05R 1 1 1CES 1
D. Referenced Information
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM HYDRAULIC POWER 液压3(107)
