• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-22 07:03来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


_______________________________________________
 TASK 28-42-00-740-005
 CHECK OF THE FUEL QUANTITY INDICATING COMPUTER STATUS
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS


 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Refer to the MMEL TASK: 73-30-02
 Engine Fuel and Control
 Fuel Used Indication
 (FAA only)

 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific Fuel Configuration No specific Removal of Equipment
 1EFF : ALL 1 28-42-00Page 401 1 1 May 01/04R 1 1 1CES 1


 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-11-28-650-003 Pressure Refuel with Automatic Control 28-25-00-650-001 Pressure Defuel 28-25-00-869-001 Fuel Transfer 31-32-00-860-001 Procedure to Get Access to the SYSTEM REPORT/TEST
 Menu Page
 31-60-00-860-001 EIS Start Procedure
 34-10-00-860-004 IR Alignment Procedure

 3. Job Set-up
__________
 Subtask 28-42-00-941-051

 A. Safety Precautions
R  (1) Put the safety barriers in position. Subtask 28-42-00-860-056
 B. Aircraft Maintenance Configuration
 (1)
 Do an IR alignment (Ref. TASK 34-10-00-860-004).

 (2)
 Do the EIS start procedure (ECAM only) (Ref. TASK 31-60-00-860-001), then:

 (a)
 On the ECAM control panel (CP), push (in) the FUEL pushbutton switch (P/BSW).

 (b)
 Make sure that the FUEL page shows on the ECAM lower display-unit (DU).

 (c)
 On the ECAM CP, push (in) the STS P/BSW.

 (d)
 Make sure that the STATUS page shows on the ECAM lower DU.

 (e)
 Make sure that there are no FUEL messages under MAINTENANCE.

 


 1EFF : ALL 1 28-42-00Page 402 1 1 Aug 01/04 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,

 

 Subtask 28-42-00-650-054
 C. Fuel Configuration
 (1) Refuel the fuel tanks as follows (Ref. TASK 12-11-28-650-003):
 -the wing tank to 1000 kg (2204.6220 lb) minimum
 -the center tank to 1500 kg (3306.9330 lb) minimum.
 **ON A/C 301-399,

 Subtask 28-42-00-650-054-A
 C. Fuel Configuration
 (1) Refuel the fuel tanks as follows (Ref. TASK 12-11-28-650-003):
 -the applicable wing tank to 1500 kg (3306.9330 lb) minimum
 -the center tank to 2000 kg (4409.2440 lb) minimum.
 **ON A/C ALL

 4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 28-42-00-740-073
 A. System Report (BITE)
 (1) Do this test: NOTE : When you push (in) the line key adjacent to FUEL> indication,
____ the Multipurpose Display and Control Unit (MCDU) can initially show CH1 or CH2.
 1EFF : ALL 1 28-42-00Page 403 1 1 Aug 01/05 1 1 1CES 1


 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU, get access to the FUEL page (Ref. TASK 31-32-00-860-001). The MCDU shows the CH1 (CH2) FUEL menu.
 2. Push (in) the NEXT PAGE key.  The second FUEL menu page is shown.
 3. Push (in) the line key adjacent to <FQIS STATUS indication.  The MCDU shows:CH1 GRADE1 CH2 GRADE1
 NO FAULTS DETECTED.
 4. Push (in) the line key adjacent to <RETURN indication two times. The MCDU shows the CH1 (CH2) FUEL menu.
 5. Push (in) the line key adjacent to SELECT CHANNEL 2 (1). The MCDU shows the CH2 (CH1) FUEL menu.
 6. Push (in) the line key adjacent to <FQIS STATUS indication.  The MCDU shows:CH1 GRADE1 CH2 GRADE1
 NO FAULTS DETECTED.
 7. Push (in) the line key adjacent to <RETURN indication two times. The MCDU shows the CH1 (CH2) FUEL menu.
 8. Push the line key <RETURN frequently until the CFDS menu page is shown. 
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FUEL 燃油5(16)