曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
TELVENT Low Level Windshear Alert System
Almos
36
LLWAS
Low Level Windshear Alert System
2.1.9.1.2 LLWASAAD
Parameters Units
1. Wind direction “D” degrees
2. Wind speed “S” knots
3. Gust knots
This function calculates a gust string that displays centerfield wind data at the
bottom of the AAD.
The string format input determines the order and content of the gust string
output e.g. a string format of the form CF<DIR><SPD><G><GUST> would
produce the following centerfield wind display (<G> adds the character “G” if
a gust is currently valid):
Wind direction – Average wind speed – Wind gust speed
The gust threshold is a value set above the average wind speed. When the
calculated “peak” wind exceeds the average by more than the threshold, then
a gust value is displayed on the AAD.
2.1.10 Archiving / Playback
The Archiver application is used to independently store data from the remote
MetConsole servers. Two optional features are often installed with the
Archiver to provide a full archive & replay system:
• Media backup
• Data replay
One of a number of media backup options is available (i.e. Tape, optical disk,
removable disk drive).
The archiver application normally runs in the Windows task bar, and as such
is usually available from the bottom right of the screen (depending on any
personalised settings that may have been set up).
The displayed icon may change depending on the state of the archiver:
The archiver is connected to the hot server, and idle.
TELVENT Low Level Windshear Alert System
Almos
37
LLWAS
Low Level Windshear Alert System
The archiver is currently receiving data from the hot server.
The archiver is unable to connect to the hot server, and is retrying.
To access the archiver application, right-click on the icon (whichever icon is
displayed) to display a menu.
Click on Open Main Window to open the archiver application screen. Click
on Close to close the archiver, or click on About to view the archiver copyright
and version information.
Each operation may be configured to use a password, and displays a security
login box such as the following:
Enter your username and password to access the software.
The Main Window, once opened, is displayed similar to the following:
TELVENT Low Level Windshear Alert System
Almos
38
LLWAS
Low Level Windshear Alert System
In addition to the action buttons in the main window, four additional status
fields are given:
1. Archiver Status: This indicates the current state of the archiver application.
2. Instructions Pane: This provides information on the current state, and
available options, if appropriate.
3. Connection State & Progress Type: This provides a text message indicating
the state of the connection. If the archiver is performing a lengthy
operation, this changes to indicate the type of operation being displayed in
the Progress Bar (4).
4. Progress Bar: When performing a lengthy operation, this changes to
indicate the current state of the operation.
The action buttons present are:
Archive: Click this button to resume archiving online data from
MetConsole. Stop pauses the online data archive.
Reload: Reloads (restores) data from removable media storage. See
Reloading Data below.
Re-Play: Replays the currently available data. See Replaying Data
below.
Backup: Manually Backs up data to the removable media storage.
The archiver goes idle during this process.
Report: Reports on the most recent media operations. This is a
third party report provided by the media software vendor.
About: Displays the copyright message and version information.
Stop: Stops the action currently being carried out. Not
available when Idle.
2.1.11 Maintenance
NOTE: Comprehensive Maintenance sections exist in both the WAWS
Hardware Manual and the MetConsole Reference Manual.
Described below is an overview of the type of maintenance tools that are
available to the technical staff.
TELVENT Low Level Windshear Alert System
Almos
39
LLWAS
Low Level Windshear Alert System
2.1.11.1 Master Station Maintenance Screens
A comprehensive set of maintenance and diagnostic screens are available to
the user. These features are fully described in the BITE section of this
document
The ‘Maintenance’ windows will only be accessible by the Maintenance user
and is not required for ATC users.
2.1.11.1.1 Help
Extensive use of Tool Tips is made throughout the system. Positioning the
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
空管资料5(27)
