EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú
34-62-01
ú ú 07.1 Page 208 ú Jul 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
Portable Data Loader (Diskette)
Figure 202 (Sheet 1)
C95305
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú
34-62-01
ú ú
ú ú 07.101 Page 209
ú ú Jul 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500
MAINTENANCE MANUAL
LOAD IN PROGRESS
LOAD COMPLETE
LOAD FAILURE
EXAMPLE OF FAILURE MESSAGES
CDU DISPLAY - DATA LOADING
Portable Data Loader
Figure 202 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú
34-62-01
ú ú
ú ú ú 06.101 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 210Jul 12/02
3.
ú ú ú ú ú ú
ú
ú
A
737-300/400/500MAINTENANCE MANUAL
(g) Do the crossload again until NEXT MISMATCH is not shown.
NOTE: If the ANALOG DISCRETES page is shown, the program pins
____ on one of the FMCs must be changed.
(h) If NEXT MISMATCH is not shown, push the LSK adjacent to INDEX to get out of the crossload.
TASK 34-62-01-402-230Performance (Perf) Factors Modification Procedure
__________________________________________________
A. General
(1) Performance factors go to their default values when an operationalprogram (OPS) is loaded into the FMC. If different values aredesired they must be put in manually. The manual values are resetto the default values at flight completion or FMC power-up. If aperformance defaults data base is loaded into the FMC, this inhibitsvalues from being put in manually.
B. References
(1) AMM 24-22-00/201, Electrical Power
C. Access
(1) Location Zones
101 Control Cabin, Left
102 Control Cabin, Right
D. Procedure
S 472-235
(1) Do these steps to modify the perf factors:
(a)
Push the INIT REF mode key on the CDU.
(b)
Push the LSK adjacent to MAINT.
(c)
Push the LSK adjacent to FMC LEFT.
(d)
Push the LSK adjacent to PERF FACTR.