• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-02 23:42来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 ú operate the FMCS in a specified geographic area. A NDB is necessary to
 ú replace an expired navigation data base. You can find the expired date
 ú for the database on the IDENT 1/X page shown on the CDU.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú

 34-62-01
 ú ú 03.1 Page 201 ú Jul 12/02

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 ú L. The performance defaults data base contains the data used by the ú operational program to calculate the navigation and guidance functions. ú This data base is loadable only on FMC P/Ns 10-62225-XXX for software ú updates U7, 8, 10 and subsequent. ú M. The software options database contains the software options used by the ú FMC operational program. This data base is loadable only on FMC P/Ns ú 10-62225-XXX for software updates U7.1, 8.1, 10 and subsequent. ú ú TASK 34-62-01-472-197 ú2. FMC Software Installation with a Portable Data Loader
_____________________________________________________
 A. General ú (1) This procedure tells you how to install software in the FMC with the ú portable data loader. ú (2) If you install a new operational program (OPS) the databases and the ú performance factors go to their default values. You must install ú the databases again after the OPS installation. When a performance ú defaults database is not used, the performance factors must be put ú in manually.
 NOTE: The op program and the performance defaults database are
____ loadable only on FMC P/Ns 10-62225-XXX with software update
 ú  (7, 8, 10) and subsequent. The software options database is loadable, as a separate database, only on FMC P/N 10-62225-XXX with software update (7.1, 8.1, 10) and
 ú  subsequent. These can only be loaded with a high speed (diskette) data loader.
 ú (3) AIRPLANES WITH FMC P/N 10-62225-004; ú The operational program software (OPS) U10.3 and before should not ú be loaded into this FMC.
 (4)  The PDL interfaces with the FMC through the FMC data transfer unit receptacle. The PDL gets 115V AC, 400 Hz power through the receptacle. You can find the FMCS data transfer unit receptacle on the top of the P18-1 panel.
 B. Special Tools and Equipment ú (1) 964-0400-006 (or equivalent) - High Speed Data Loader, Sundstrand, ú Redmond, WA ú ú NOTE: The Sundstrand PDL uses a diskette to load the software ú and is compatible with both low and high speed formats. ú ú The database loader is not a Boeing supplied item. This ú coverage is included for information only. See the data ú loader instructions, which are supplied by the vender. ú
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH EFIS ú

 34-62-01

 ú ú 09.2 Page 202 ú Jul 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SEE


AFT

 


FMCS DATA TRANSFER UNIT RECEPTACLE

 


Component Location
Figure 201

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.
 AIRPLANES WITH EFIS ú


 34-62-01

 ú ú ú ú 02.101 Page 203 ú ú Jul 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 C. Reference
 (1)  AMM 24-22-00/201, Manual Control
 D. Access
 (1)  Location Zones
 101 Control Cabin, Left
 102 Control Cabin, Right

 ú E.  Prepare for FMC Software Installation
 S 862-113
 CAUTION: MAKE SURE THE PDL POWER SWITCH IS IN THE OFF POSITION AND THE
_______ FMCS IS NOT OPERATED BEFORE YOU CONNECT THE INTERFACE CABLE. THIS CAN PREVENT DAMAGE TO THE EQUIPMENT.
 (1)  Open these circuit breakers:
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 导航 NAVIGATION 5(91)