- replace the RMP-COM/NAV FREQ SEL, 1 (1RG1) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
R **ON A/C 062-099, 106-149, 151-199, 201-299, 301-399, 401-499,
A. If the tests give these three maintenance messages
RMP1(1RG1)
RMP1(1RG1)/RMP2(1RG2)
RMP1(1RG1)/RMP3(1RG3):
- replace the RMP-COM/NAV FREQ SEL, 1 (1RG1) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
**ON A/C ALL
B. Do the test given in Para. 3.B.
TASK 23-13-00-810-855
Failure of the RMP 2
1. Possible Causes
_______________
- RMP-COM/NAV FREQ SEL, 2 (1RG2)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 23-13-00-740-001 BITE Test of the Radio Management AMM 23-13-13-000-001 Removal of the Radio Management Panel (CRMP) (1RG1, 1RG2, 1RG3) AMM 23-13-13-400-001 Installation of the Radio Management Panel (CRMP) (1RG1, 1RG2, 1RG3)
3. Fault Confirmation
__________________
A. Job Set-Up On the RMP 1, RMP 2 and RMP 3, make sure that the ON/OFF switches are at ON.
B. Test Do the BITE test of the Radio Management (Ref. AMM TASK 23-13-00-740-001).
NOTE : Do this test for the RMP 1, RMP 2 and RMP 3.
____
4. Fault Isolation
_______________
R **ON A/C 001-049, 051-061, 101-105,
A. If the tests give these three maintenance messages
RMP 1 : NO DATA FROM RMP 2
RMP 2 : NO DATA FROM RMP 2
RMP 3 : NO DATA FROM RMP 2:
- replace the RMP-COM/NAV FREQ SEL, 2 (1RG2) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
R **ON A/C 062-099, 106-149, 151-199, 201-299, 301-399, 401-499,
A. If the tests give these three maintenance messages
RMP2(1RG2)
RMP2(1RG2)/RMP1(1RG1)
RMP2(1RG2)/RMP3(1RG3):
- replace the RMP-COM/NAV FREQ SEL, 2 (1RG2) (Ref. AMM TASK 23-13-13-000-001) and (Ref. AMM TASK 23-13-13-400-001).
**ON A/C ALL
B. Do the test given in Para. 3.B.
AIRCRAFT COMMUNICATION ADDRESSING AND REPORTING SYSTEM (ACARS)
______________________________________________________________ FAULT ISOLATION PROCEDURES
__________________________
TASK 23-24-00-810-801
Failure of the ACARS MU
1. Possible Causes
_______________
- MU-ACARS (1RB)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R AMM 23-24-00-740-003 AMM 23-24-34-000-001 Removal of the ACARS Management Unit (MU) (1RB) AMM 23-24-34-400-001 Installation of the ACARS Management Unit (MU) (1RB)
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the ACARS (Ref. AMM TASK 23-24-00-740-003).
4. Fault Isolation
_______________
A. If the test gives the maintenance message ACARS MU (1RB):
- replace the MU-ACARS (1RB) (Ref. AMM TASK 23-24-34-000-001) and (Ref. AMM TASK 23-24-34-400-001).
B. Do the test given in Para. 3.
TASK 23-24-00-810-802
Failure of the ACARS Pin Programming
1. Possible Causes
_______________
- MU-ACARS (1RB)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R AMM 23-24-00-740-003 AMM 23-24-34-000-001 Removal of the ACARS Management Unit (MU) (1RB) AMM 23-24-34-400-001 Installation of the ACARS Management Unit (MU) (1RB) ASM 23-24/01
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 COMMUNICATIONS 通讯1(93)
