• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 23:42来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (2)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 (3)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (4)
 Close the aft passenger/crew door 832 or 842 (Ref. TASK 52-10-00-410-001).


 (5) Remove the access platform(s). Subtask 52-13-12-862-051
 D. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001)

 1EFF : ALL 1 52-13-12Page 609 1 1 Feb 01/98 1 1 1CES 1


 CYLINDER - DOOR DAMPER AND EMERGENCY OPERATION - REMOVAL/INSTALLATION
_____________________________________________________________________ TASK 52-13-14-000-001 Removal of the Door-Damper and Emergency-Operation Cylinder
 1.
 Reason for the Job

__________________
 Self Explanatory


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific access platform 3.5 m (11 ft. 6 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-46-000-002 Removal of the Door Linings at the AFT Passenger/Crew
 Doors 52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
 Door 52-13-14-991-007 Fig. 401
 1EFF : ALL 1 52-13-14Page 401 1 1 Feb 01/98 1 1 1CES 1


 3. Job Set-up
__________ Subtask 52-13-14-010-065 R A. Get Access WARNING : DO NOT OPEN THE PASSENGER/CREW DOOR IF THE WIND SPEED IS MORE
_______
 THAN 65 KNOTS.

 WARNING : BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
_______
 -
THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.

 -
THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.


 WARNING : STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES.
_______ RESIDUAL PRESSURE COULD CAUSE THE DOOR TO OPEN WITH A SUDDEN FORCE AND INJURE PERSONS AND/OR DAMAGE THE AIRCRAFT.
 (1)
 Put an access platform in position in front of the applicable passenger/crew door 832 or 842.

 (2)
 Open the applicable passenger/crew door (Ref. TASK 52-10-00-010-001), 832, 842.

 (3)
 Apply the safety precautions before you start work on the door (Ref. TASK 52-10-00-860-001).


 Subtask 52-13-14-865-067
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10 121VU EIS/SDAC1 AND 2/DOOR/DET/PAX 48WV P05
 Subtask 52-13-14-862-056
 C. Not Applicable
 1EFF : ALL 1 52-13-14Page 402 1 1 May 01/04 1 1 1CES 1


 Subtask 52-13-14-010-066 R D. Removal of the Door Support-Arm Lining
 (1) Remove the support arm lining panels (Ref. TASK 25-23-46-000-002).
 (a)
 For the left passenger/crew door: 832FZ, 832GZ.

 (b)
 For the right passenger/crew door: 842FZ, 842GZ.


 4. Procedure
_________
 Subtask 52-13-14-020-057

 A. Removal of the Door-Damper and Emergency-Operation Cylinder
 (Ref. Fig. 401/TASK 52-13-14-991-007)

 (1)
 Remove the cotter pin (18) and discard it.

 (2)
 Remove the nut (17) and the washer (16).

 (3)
 Remove the bolt (12) and the washer (13).

 (4)
 Remove the bushes (15) and disengage the fork (11) from the telescopic rod (14).

 (5)
 Remove the bushes (23) and (24) from the fork (11).

 (6)
 Remove the end of the damper and emergency-operation cylinder (10).

 (7)
 Remove the cotter pin (1) and discard it.

 (8)
 Remove the nut (2) and the washer (3).

 (9)
 Remove the bolt (9), the washer (8) and the bush (7).


 (10)
 Remove the damper and emergency-operation cylinder (10).

 (11)
 Remove the two circlips (4) from the pin (5) of the yoke.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM DOORS 舱门2(97)