A320飞机维护手册 AMM DOORS 舱门2(72)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (3) Obey the special precautions before you start work on the door. (Ref. TASK 52-10-00-860-001)
 4. Procedure_________
 Subtask 52-13-00-220-052
 A. Inspection (Ref. Fig. 601/TASK 52-13-00-991-009) 
R R  (1) Do a detailed inspection of the door stop assemblies of the aft L and R passenger/crew doors.
 (2) Make sure that there are no cracks or signs of corrosion on the stop fittings and the stop screws. 
R  (3) Do a check of the door stop screws for damage. 
R R  (a) Make sure that the minimum thickness for all the stop screw heads is 2.5 mm (0.0984 in.).
 (b) If the thickness is less than 2.5 mm (0.0984 in.), replace the door stop screws (Ref. TASK 52-13-31-000-002) (Ref. TASK 52-13-31-400-002).

 

R  Door Stop Fittings Figure 601/TASK 52-13-00-991-009
 1EFF : 1 1 1CES  ALL  1 111 52-13-00 Page 603 May 01/02

 

 5. Close-up
________ Subtask 52-13-00-410-058
 A. Close Access
 (1)
 Obey the special precautions after the work on the door. (Ref. TASK 52-10-00-860-002)

 (2)
 Close the applicable aft passenger/crew door (Ref. TASK 52-10-00-410-001).

 (3)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (4)
 Remove the access platform(s).

 1EFF : ALL 1 52-13-00Page 604 1 1 May 01/02R 1 1 1CES 1

R TASK 52-13-00-210-001
R General Visual Inspection of Door Stop Assemblies on Aft Passenger/Crew Door, R LH/RH R 1. Reason for the Job
__________________ R Refer to the MPD TASK: 521301-02 R 2. Job Set-up Information
______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific access platform 3.5 m (11 ft. 6 in.)

R B. Consumable Materials

R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 11-004 USA MIL-T-81533
R 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
R (Ref. 20-31-00)
R Material No. 19-003 USA AMS 3819
R LINT-FREE COTTON CLOTH (Ref. 20-31-00)

R C. Referenced Information

R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 52-10-00-010-001 R 52-10-00-410-001 R 52-10-00-860-001 R R 52-10-00-860-002 R R SRM 511100 P.Block 001 R SRM 512200 P.Block 001 R 52-13-00-991-023 Opening of the Passenger/Crew Door Closing of the Passenger/Crew Door Special Precautions before Work on the Passenger/Crew Door Special Precautions after Work on the Passenger/Crew Door (for corrective action) (for corrective action) Fig. 602
 1EFF : ALL 1 52-13-00Page 605 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-13-00Page 606 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-13-00Page 607 1 1 May 01/03 1 1 1CES 1

R  3. Job Set-up__________ 
R  Subtask 52-13-00-010-062 
R  A. Get Access 
R  (1) Put an access platform in position : 
R  (a) For the left passenger/crew door at the zone 832. 
R  (b) For the right passenger/crew door at the zone 842. 
R  (2) Open the aft passenger/crew door 832 (842), (Ref. TASK 52-10-00-010-
R  001). 
R  (3) Obey the special precautions before you start the work on the door 
R  (Ref. TASK 52-10-00-860-001). 
R  Subtask 52-13-00-110-053 
R  B. Cleaning of the Structure 
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ 
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. 
R  OBEY THE MANUFACTURERS INSTRUCTIONS. 
R  PUT ON PROTECTIVE CLOTHING. 
R  DO NOT GET THEM IN YOUR MOUTH. 
R  DO NOT SMOKE. 
R  DO NOT BREATHE THE GAS. 
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. 
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R  WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______ 
R  MATERIAL/S. 
R  USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK. 
R  (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) 
R  and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if 
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门2(72)