3. Job Set-up
__________
Subtask 52-13-12-861-051
A. Energize the ground service network
(Ref. TASK 24-42-00-861-001)
Subtask 52-13-12-010-055
B. Get Access
WARNING : BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
_______
-
THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
-
THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
WARNING : DO NOT OPEN THE PASSENGER/CREW DOOR IF THE WIND SPEED IS MORE
_______
THAN 65 KNOTS.
WARNING : STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES.
_______ RESIDUAL PRESSURE COULD CAUSE THE DOOR TO OPEN WITH A SUDDEN FORCE AND INJURE PERSONS AND/OR DAMAGE THE AIRCRAFT.
(1)
Put the access platform in position at the applicable aft passenger/crew door 832 or 842.
(2)
Open the applicable FWD passenger/crew door 832 or 842 (Ref. TASK 52-10-00-010-001).
(3)
Obey the special precautions before you start work on the door (Ref. TASK 52-10-00-860-001)
Subtask 52-13-12-865-058
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10 121VU EIS/SDAC1 AND 2/DOOR/DET/PAX 48WV P05
1EFF : ALL 1 52-13-12Page 602 1 1 Feb 01/98 1 1 1CES 1
Subtask 52-13-12-020-056
D. Removal of the Door Suspension Mechanism
(Ref. TASK 52-13-12-000-001)
(1)
Remove the door stay mechanism, if not removed.
(2)
Remove the support arm, if not removed.
4. Procedure
_________
Subtask 52-13-12-220-054
A. Inspection of the Support Arm
(Ref. Fig. 601/TASK 52-13-12-991-008)
(1)
Do a detailed visual inspection of the bushes and the part of the support arms.
(2)
Make sure that the dimensions are correct.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | CC | | | | | | | | | OD1 | 15.880 | 15.893 | | | 15.867 | | | | | (0.6251)| (0.6257)| | | (0.6246)| | | | | | | 0.000 | 0.038 | | | 0.078 | | | | | (0.0000)| (0.0015)| | |(0.0030)| | ID2 | 15.893 | 15.918 | | | | 15.944 | | | | (0.6257)| (0.6266)| | | | (0.6277)| | |--------|---------|---------|---------|---------|---------|---------|--------| | DD | | | | | | | | | OD3 | 12.704 | 12.715 | | | 12.691 | | | | | (0.5001)| (0.5006)| | | (0.4996)| | | | | | | 0.000 | 0.037 | | | 0.0074 | | | | | (0.0000)| (0.014)| | |(0.0029)| | ID4 | 12.715 | 12.741 | | | | 12.765 | | | | (0.5006)| (0.5016)| | | | (0.5025)| | -------------------------------------------------------------------------------
1EFF : ALL 1 52-13-12Page 603 1 1 Feb 01/98 1 1 1CES 1
Door Support Arm
Figure 601/TASK 52-13-12-991-008
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM DOORS 舱门2(95)