R 4. Procedure_________
R Subtask 52-13-00-210-054
R A. Inspection
R (Ref. Fig. 602/TASK 52-13-00-991-023)
R (1) Do a visual inspection of the door stop assemblies of the aft left
R and right passenger/crew doors.
R (2) Make sure that there is no:
R (a) Corrosion damage
R - If you find corrosion damage, refer to the Stuctural Repair
R Manual (Ref. SRM 512200 P.Block 001) for types, inspection,
R removal and corrosion protection.
R (b) Other damage (cracks, scratches, stress, marks, dents,
R bumps,...):
R - If you find other damage, refer to the Structural Repair Manual
R (Ref. SRM 511100 P.Block 001) for damage classification and
R corrective action.
R 5. Close-up________
R Subtask 52-13-00-410-063
R A. Close Access
R (1) Obey the special precautions after the work on the door (Ref. TASK
R 52-10-00-860-002).
R (2) Close the aft passenger/crew door 832 (842), (Ref. TASK 52-10-00-410-
R 001).
R (3) Make sure that the work area is clean and clear of tool(s) and other
R items.
R (4) Remove the access platform(s).
R R Aft Passenger/Crew Doors - Door Stop Assemblies Figure 602/TASK 52-13-00-991-023
1EFF : 1 1 1CES ALL 1 111 52-13-00 Page 608 May 01/03
R TASK 52-13-00-210-002
R General Visual Inspection of Aft Passenger/Crew Door Skin, External Surface,
R LH/RH
R 1. Reason for the Job__________________
R Refer to the MPD TASK: 521303-01
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific access platform 3.5 m (11 ft. 6 in.)
R B. Consumable Materials
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 11-004 USA MIL-T-81533
R 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
R (Ref. 20-31-00)
R Material No. 19-003 USA AMS 3819
R LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R C. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R SRM 511100 P.Block 001 (for corrective action)
R SRM 512200 P.Block 001 (for corrective action)
R 52-13-00-991-022 Fig. 603
1EFF : ALL 1 52-13-00Page 609 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-13-00Page 610 1 1 May 01/03 1 1 1CES 1
R 3. Job Set-up__________
R Subtask 52-13-00-010-063
R A. Get Access
R (1) Put an access platform in position :
R (a) For the left passenger/crew door at the zone 832.
R (b) For the right passenger/crew door at the zone 842.
R Subtask 52-13-00-110-052
R B. Cleaning of the Structure
R WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______
R MATERIALS ONLY WITH A GOOD SUPPLY OF AIR.
R OBEY THE MANUFACTURERS INSTRUCTIONS.
R PUT ON PROTECTIVE CLOTHING.
R DO NOT GET THEM IN YOUR MOUTH.
R DO NOT SMOKE.
R DO NOT BREATHE THE GAS.
R THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
R GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______
R MATERIAL/S.
R USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004)
R and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if
R necessary.
R 4. Procedure_________
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门2(73)
