B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-023 USA MIL-I-631 POLYTEREPTHALATE (Ref. 20-31-00) Material No. 05-024 FABRIC (Ref. 20-31-00) R Material No. 08-004 USA MIL-A-25457 ADHESIVE SEALANT (Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
1EFF : ALL 1 52-13-18Page 801 1 1 Nov 01/99 1 1 1CES 1
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-410-001 Closing of the Passenger/Crew Door 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
Door 52-10-00-860-002 Special Precautions after Work on the Passenger/Crew
Door 52-13-18-000-001 Removal of the Door Seal 52-13-18-400-001 Installation of the Door Seal 52-13-18-991-002 Fig. 801 52-13-18-991-003 Fig. 802 52-13-18-991-004 Fig. 803 52-13-18-991-005 Fig. 804
3. Job Set-up
__________
Subtask 52-13-18-941-052
A. Get Access
WARNING : BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
_______
-
THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
-
THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
WARNING : STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES.
_______ RESIDUAL PRESSURE COULD CAUSE THE DOOR TO OPEN WITH A SUDDEN FORCE AND INJURE PERSONS AND/OR DAMAGE THE AIRCRAFT.
(1)
Put the access platform in position in the zone 832 or 842.
(2)
Open the door 832 or 842 (Ref. TASK 52-10-00-010-001).
(3)
Obey the special precautions before you start work on the door (Ref. TASK 52-10-00-860-001).
1EFF : ALL 1 52-13-18Page 802 1 1 Feb 01/98 1 1 1CES 1 Subtask 52-13-18-020-051
B. Seal Removal.
(1) Remove the door seal (Ref. TASK 52-13-18-000-001).
4. Procedure
_________
(Ref. Fig. 801/TASK 52-13-18-991-002, 802/TASK 52-13-18-991-003, 803/TASK
52-13-18-991-004, 804/TASK 52-13-18-991-005) Subtask 52-13-18-340-052
A. Repair the Signs of Chafing on the Seal.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(1)
Lightly rub the chafing area with very fine emery paper.
(2)
Carefully degrease the chafing area with CLEANING AGENTS (Material No. 11-004) and a lint-free cloth.
(3)
Apply a thin layer of BONDING AND ADHESIVE COMPOUNDS (Material No. 08-004) to the chafing area and make it smooth with a spatula.
(4)
Make sure that dust does not touch the chafing area. Let the adhesive dry between 10 hours and 12 hours.
1EFF : ALL 1 52-13-18Page 803 1 1 Feb 01/98 1 1 1CES 1
Wooden Bonding Block
Figure 801/TASK 52-13-18-991-002
1EFF : ALL 1 52-13-18 Page 804
1 1 Feb 01/98
1 1
1CES 1
Wooden Bonding Block
Figure 802/TASK 52-13-18-991-003
1EFF : ALL 1 52-13-18 Page 805
1 1 Feb 01/98
1 1
1CES 1
Repair of Damage
Figure 803/TASK 52-13-18-991-004
1EFF : ALL 1 52-13-18 Page 806
1 1 Feb 01/98
1 1
1CES 1
Repair of Damage
Figure 804/TASK 52-13-18-991-005
1EFF : ALL 1 52-13-18 Page 807
1 1 Feb 01/98
1 1
1CES 1
Subtask 52-13-18-340-050
B. Repair the Cuts with a small Depth (not more than one third of the
thickness of the seal).
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门2(109)
