(4)
Remove the screw (86).
(5)
Loosen and remove the screws (84).
(6)
Remove the nuts (81).
1EFF : ALL 1 52-11-31Page 419 1 1 May 01/04R 1 1 1CES 1
Roller Figure 406/TASK 52-11-31-991-007
1EFF : 1 1R 1CES ALL 1 11 1 52-11-31 Page 420 Feb 01/02
Door Stop Fittings Figure 407/TASK 52-11-31-991-008
1EFF : 1 1R 1CES ALL 1 11 1 52-11-31 Page 421 May 01/98
Subtask 52-11-31-020-056
F. Removal of the Roller
(Ref. Fig. 408/TASK 52-11-31-991-009)
(1)
Loosen the nuts (91) and remove them.
(2)
Remove the bolts (92).
(3)
Remove the roller (90) from the door.
(4)
Disassemble the roller (90) as follows:
(a)
Remove the cotter pin (93) and discard it.
(b)
Loosen the nut (94) and remove it.
(c)
Remove the washer (95).
(d)
Remove the bolt (96), the roller assembly (97), the spacer (98) and the fitting (90).
Subtask 52-11-31-020-057
G. Removal of the Fittings of the Guide Arms
(Ref. Fig. 409/TASK 52-11-31-991-010)
(1)
Disengage the guide arms (100) and (101) (Ref. TASK 52-11-12-000-003).
(2)
Loosen the nuts (102) and remove them.
(3)
Remove the bolts (106) and the washers (103).
(4)
Remove the fitting pivots (105) and (108).
(5)
Remove the serrated plates (107) (104).
1EFF : ALL 1 52-11-31Page 422 1 1 Feb 01/02R 1 1 1CES 1
Roller Fitting Figure 408/TASK 52-11-31-991-009
1EFF : 1 1R 1CES ALL 1 11 1 52-11-31 Page 423 Feb 01/02
Fittings of the Guide Arms Figure 409/TASK 52-11-31-991-010
1EFF : 1 1R 1CES ALL 1 11 1 52-11-31 Page 424 May 01/98
TASK 52-11-31-400-002
Installation of the Stop Fittings, the Buffer, the Guide Fittings, the Rollers, the Door Stop Fittings, the Roller Fittings and the Guide Arm Fittings
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 3.5 m (11 ft. 6 in.)
R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft) No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 05-047 C Z-11.904
ANTI COR. COMPOUND(HIGH TEMP.SILICONE SEALANT)
(Ref. 20-31-00)
Material No. 09-005 USA MIL-S-81733 CLASS C CORROSION INHIBITIVE INTERFAY SEALANT (Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
71 cotter pin 52-11-11 21 -100 71 cotter pin 52-11-11 21A-100 83 lock plate 52-11-11 21 -040 83 lock plate 52-11-11 21A-040 93 cotter pin 52-11-11 21 -100 93 cotter pin 52-11-11 21A-100
1EFF : ALL 1 52-11-31Page 425 1 1 May 01/05 1 1 1CES 1 D. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-45-400-006 Installation of the Door Frame Linings at the Left FWD Passenger/Crew Door 25-23-45-400-007 Installation of the Door Frame Linings at the Right FWD Passenger/Crew Door 25-23-46-400-001 Installation of the Door Linings at the FWD Passenger/Crew Doors R 25-62-44-400-001 Installation of the Escape-Slide Pack-Assembly 52-10-00-080-001 Removal of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide 52-10-00-080-001 Removal of the Passenger/Crew Door Ballast Weight
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门2(39)
